FA+
Shop
NachT Dildo via BAD-DRAGON Productions!
17 years ago
Incoming Message...
WTF.. FA's been timing out like all hell for me lately x.X; Anywho, between fixing the car up, taking care of Ange who is sick, working on commissions, looking for a job, and trying to get a licence to help my chances of getting a job, I managed to talk to the head of Bad-Dragon ( http://www.bad-dragon.com/ ) last night. After a bit of talking with the leader of their group (who is quite personable and friendly I might add, thankfully lol) are in the midst of seeing if we can make NachT dildos.
http://www.furaffinity.net/view/993741/ <-- Bottom outline
http://www.furaffinity.net/view/1621969/
Now, we're still ballparking all the figures and tossing around ideas, but it'd be about $150-200 for a 14 inch X 3 inch useable shaft, with a knot at the base. However, here's where I need the publics oppinion the most.
What size should we do the first one, and with what options would people like to see on it? There's a good chance that if these sell good enough, they'll expand into doing other sizes and options as well. The more people that buy, the cheaper they can get, but only if they actually go through with it completely. The smaller the dildo, the cheaper it'll be in the long run!
1/2size = 9in.X2in. w/4in knot
3/4 size = 13.5inX3in. w/5in knot
Full size =18inX4in. w/6in knot
Suction-cup base
Cum-Pump insert
With or without the piercings (most likely part of the mold in latex or whatever it is)
So, lemme know all your feedback! Remember, the more people that join in, the better for everyone! :D
~N~
http://www.furaffinity.net/view/993741/ <-- Bottom outline
http://www.furaffinity.net/view/1621969/
Now, we're still ballparking all the figures and tossing around ideas, but it'd be about $150-200 for a 14 inch X 3 inch useable shaft, with a knot at the base. However, here's where I need the publics oppinion the most.
What size should we do the first one, and with what options would people like to see on it? There's a good chance that if these sell good enough, they'll expand into doing other sizes and options as well. The more people that buy, the cheaper they can get, but only if they actually go through with it completely. The smaller the dildo, the cheaper it'll be in the long run!
1/2size = 9in.X2in. w/4in knot
3/4 size = 13.5inX3in. w/5in knot
Full size =18inX4in. w/6in knot
Suction-cup base
Cum-Pump insert
With or without the piercings (most likely part of the mold in latex or whatever it is)
So, lemme know all your feedback! Remember, the more people that join in, the better for everyone! :D
~N~
~N~
~N~
~N~
~N~
~N~
1, the longer it will take the better it will look and the better work it will have.
2, right now I can't but anything that's over 50 buck;_; damn monetary crisis.
~N~
~N~
Hope Ange is feeling better.
~N~
as close to 'real size' as possable >.>
bwahaha <3
~N~
~N~
...not that I know anything about this or anything, just a guess >.>
~N~
~N~
~N~
And I'd be sooooo glad I didn't have to mediate THAT collaboration (ie get everyone's input and blend it together to produce a design) :P
Varka
~N~
~N~
The piercings would make for an interesting sensation, pierced for his or her pleasure eh? Doesnt the head of Bad Dragon test these out? I'd be interested to hear how the piercings felt.
~N~
The piercings would, I think, feel incredible - done either in silicone moulded into the toy, or as secure 'holes' that you can put REAL piercings inside of. Both are easily possible, just a matter of which people want most, maybe?
~N~
Then its just a matter of keeping it clean and having lots of fun
~N~
~N~
~N~
~N~
(if possible the piercings as well)
~N~
~N~
~N~
~N~
~N~
~N~
As for the extras, a suction cup base would be nice...and the piercings are a must since they help make the thing really stand out.
~N~
~N~
~N~
Also, I think the 18 incher wouldn't sell. Or at least.. not well. It'd be like... serious size queens only.
~N~
Cum-pump ftw! :3
~N~
~N~
We'd have to buy the actual piercings seperately though, or get you folks to buy your own? How much does cock jewelery cost anyway?
Moulded-in piercings would effectively be 'free', as we don't need to do any weird stuff to make them happen. (Unless you want them coloured metallic, or in a different colour/material....)
Varka
~N~
http://www.monstersteel.com/14g-Bla.....-nid-1613.html
http://www.monstersteel.com/Surgica.....g-nid-730.html
The over the hood cuffs are going to be the hardest to find really.
The half sized seems the most realistic in terms of what the average person could handle. As for the base, I would say keep either option open. Piercings could be added later, but if one went for the cum pump it might interfere with the flow depending on where the piercings were in relation to the tube.
I have to say, though. Why not a variation for each? At least eventually.
~N~
Basically we can do the following things as 'extras', which you can choose to have or not to have, in any combination:
1. Cumtube ($10-15 extra or something, includes big meaty cum syringe)
2. Piercing holes (say $5 extra per group - add an option to purchase cock jewellery for $5-10 extra depending on how much it costs)
3. Suction cup base ($5-10 extra)
So... well, I don't think we need to just choose one: we've got the flexibility to do a whole variety :p
Varka
that is if they make them lol
~N~
~N~
Bring on the hurt. :D
~N~
~N~
~N~
~N~
~N~
~N~
~N~
~N~
~N~
~N~
~N~
~N~
As for piercings, hell yeah!
Finally, suction cup bases are considered a standard, and though I'd argue the cum pump insert would be murry, I've known people to complain about problems with it, and it seems the initial line should be as cheap as possible to get more of them bought.
http://www.furaffinity.net/journal/488108/
~N~
~N~
~N~
~L~
~N~
~N~
There is alot of fun stuff about that dildo, I don't think the piercings will help make it more enticing honestly.. I'd buy it either way, though :U
Sure, if you're not clean, little bits of stuff might get stuck in those details, but the toy material is flexible and very elastic: you could just rub it with a towel or paper towel or something to clean it out. But really... metal piercings will suffer the same problem of having to clean it as regular moulded in stuff.
I understand completely, though I still say a smooth toy might be more pleasurable. Also I figured if they were metal 'peircings' they could come off and be cleaned seperately, though there would be the issue with holes x.x;
~N~
~N~
Question, are you molding them based on your own cock and then adding NachT features to it? XD
~N~
I've toyed with the idea of buying from something from them... but I wasn't sure which one so far ;)
~N~
~N~
~N~
~N~
~N~
~N~
Also. Godsend.
~N~
~N~
I'd definitely go for the 1/2 size, simply because that four inch knot is going to be realllly big.
We could maybe do the knot in a softer, squishier material, or work on our new 'hard-core' technique where you cast a harder 'core' to the toy (our regular 'hard' material) and then use softer material (Eg our 'soft') to make a toy that's very aggressive in size and shape, but amazingly comfortable to use.
If you're pushing the limits of the human body (ie the knot on the 2/3 size one), then making it more body-friendly while retaining realism is a great idea that can make the toy a lot more accessable to everyone.
It also doesn't cost too much more: rough guesstimate, the 1/2 size one could probably be $150 with a free extra included. The dual hardness could be $20 or so more, but would make the toy a factor of 10 easier to use.
Just my $0.02.
http://www.furaffinity.net/journal/488108/ There's the preorder journal for purchases =)
~N~
~N~
~N~
~N~
~N~
~N~
~N~