FA+
Shop
1394
Views
Views
11
Favorites
Favorites
Category
Sculpting / Fursuit
Species Vulpine (Other)
Size 900 x 596
File Size 444.8 kB
Report this content
More from Kurauno
I decided to finish up the Kemono Fox sculpt today! My mom was cleaning the carpets (which are still wet) so I had no access to my workroom (in the attic about said white carpet!) so I was limited to what was in my room.
What this could look like - http://www.furaffinity.net/view/17692711/ http://www.furaffinity.net/view/15990982/ (I based my sculpt on the foam work of this mask and various kemono sketches I have done)
Previous WIP - http://www.furaffinity.net/view/17690451/
Eyelids and nose are to be added later in actual construction. The nose pictured is one of several I received from
EZwolf I am not sure if he still sells them or not but they match perfect for this cute style! I wanted the freedom to alter the base. I normally don't use the noses I have on my base sculpts anymore!
I did however mark channels for LED cabling, cut marks and vent marks for the ears! I left the chin deep so that I could tailor every chin to fit. I have found more often than not I wanted more room to work with under the chin! The eyes are built into this one for ease as well :)
These are capable of having a moving jaw unlike most Kemono heads! The vision will also be much better than typical Kemono heads! When I use this base I am going to use a mesh for the inside of the whole eye face. Depending how you do the eyelids this ports can be 4inchX3inch at their largest! HUGE vision :D
These will fit ANY head size, it is by far the largest base I have ever made! More than likely the inside will need to be padded.
Size comparision to my bigcat - http://tinyurl.com/qh3kd9p (this is an old photo of the sculpt and I have moved the eyes closer since then to sit on the two parallel lines)
I have 3 slots open for pre-order for this mold!
Uncut casts are GBP£60 each.
Payment needs to be made in full and shipping is not included (I will have to calculate this once the bases are cast). I need to fill all 3 slots to make the mold otherwise I will be molding this next month.
To claim a slot either note me or send me an email at kuraunocommissions[at]outlook.com
1. PAID
2. PAID
3.
Latest updates? See
Missrars Or 
Kurauno
What this could look like - http://www.furaffinity.net/view/17692711/ http://www.furaffinity.net/view/15990982/ (I based my sculpt on the foam work of this mask and various kemono sketches I have done)
Previous WIP - http://www.furaffinity.net/view/17690451/
Eyelids and nose are to be added later in actual construction. The nose pictured is one of several I received from
EZwolf I am not sure if he still sells them or not but they match perfect for this cute style! I wanted the freedom to alter the base. I normally don't use the noses I have on my base sculpts anymore!I did however mark channels for LED cabling, cut marks and vent marks for the ears! I left the chin deep so that I could tailor every chin to fit. I have found more often than not I wanted more room to work with under the chin! The eyes are built into this one for ease as well :)
These are capable of having a moving jaw unlike most Kemono heads! The vision will also be much better than typical Kemono heads! When I use this base I am going to use a mesh for the inside of the whole eye face. Depending how you do the eyelids this ports can be 4inchX3inch at their largest! HUGE vision :D
These will fit ANY head size, it is by far the largest base I have ever made! More than likely the inside will need to be padded.
Size comparision to my bigcat - http://tinyurl.com/qh3kd9p (this is an old photo of the sculpt and I have moved the eyes closer since then to sit on the two parallel lines)
I have 3 slots open for pre-order for this mold!
Uncut casts are GBP£60 each.
Payment needs to be made in full and shipping is not included (I will have to calculate this once the bases are cast). I need to fill all 3 slots to make the mold otherwise I will be molding this next month.
To claim a slot either note me or send me an email at kuraunocommissions[at]outlook.com
1. PAID
2. PAID
3.
Latest updates? See
Missrars Or 
KuraunoCategory Sculpting / Fursuit
Species Vulpine (Other)
Size 900 x 596px
File Size 444.8 kB
Comments