Whelp here is the latest update

In the first image you see what I used for the basic eye form. I used a clear plastic presentation folder and cut them into rough eye socket shapes. I then marked off where the LED's would sit

Next I used the socket forms to cut out the bottom forms from the lens of a pair of cheap sunglasses. I cut away most of the overlapping plastic from the socket form and punched out the hole for the LED. To smooth the jagged edges of the led hole I used a candle to melt it down slightly. I then hot glued the sunglasses to the soket form.

finally I used a black sharpie to color the socket form

The next image is the before image of the eye socket, and the second shows the socket form in place.

Next I used hot glue to set the white dome from the cheep plastic painters palette over the led.

the last two images are just to show how the eyes look now that they are lit up

Although in the last image you can also see the length of felt I've run across reinforcing struts so you won't see me threw the mouth

So what do you folks think