FA+
Shop
Two Fursuits I made up for sale (Cathlamet and Mangle)
16 years ago
General
To contact me outside of FA:
* Email: sara[at]matrices.net
* Social Media: Matrices' Bluesky
* Tumblr
* My "Contact Me" page on my website.
* Email: sara[at]matrices.net
* Social Media: Matrices' Bluesky
* Tumblr
* My "Contact Me" page on my website.
Out of my fursuits that I made and own, I posess two that I could put up for sale if there is enough serious interest. I want them to go to private buyers rather than just posting them on a public auction site (like ebay), mainly so I can choose the best offer, and hopefully get them to go to buyers who will take them out a lot, since I'd love to see pictures of them in their new homes.
The first one I have is Mangle, an Akita.
http://www.matrices.net/mangle.asp
Since Mangle is one of
malameux's characters we made up just to be his fursuit, Mike asked me to change Mangle's facial markings to be less like Mangle and make it become a new character for the buyer. Primarily less black on the face, and probably taking off the white on the top of his snout, and making his eyes friendlier. It will still be an Akita, but just not Mangle. I'd be able to work with the potential buyer on this, but I'm not going to be changing the foamwork too much.
Its an all-foam based head, unlined, non-moving jaw. Switch-on/off Velcro-in 9v-operated fan in the muzzle would be included. There's vents in the top of the head(out the ears) to help exhaust heat, and there's wire in the ears (they have some limited posability to help tweak their shape). The mask itself is very light for its size, the muzzle is hollow, and can mostly squish flat if it needs to be packed in a suitcase. Nose is rigid but very lightweight pulp-based clay. A neckpiece is attached to the mask, and would go over top of the bodysuit (rather than being tucked in)
Handpaws have canvas pads on them with lightweight claws. Feet are size 12, Mike wears 12's and reports that they have a little extra room, but not a lot, so they may be too small if you have larger than size 11 1/2 to 12 sized feet. They have canvas pads layered with rubbery protective coating, fur covers the remaining bottoms on the footpaws, and shows some light wear.
The bodysuit is in very good condition. The costume overall only saw a few outings, mainly fursuit parades at cons, and photo shoots. The tail is seperately attached to the outside of the bodysuit, there are small belt-holes to thread a belt through. Zipper-enterance is on the back of the costume with a pull-string attached. Its concealed by a flap with magnet closure. I've always helped Mike get in the costume (he's never really had the desire to fursuit by himself) so I wouldn't be able to report how easy it is to get into or out of since I've always been there to help him put it on. Though I can make a video of how to put it on to illustrate if needed. All the padding is seperate and not mounted to an undersuit or the bodysuit, it comes with stuffed knee padding, butt padding, and carved foam hock (heel) padding. The knee pads do have faces drawn on them, and have been nicknamed "the slugs" just since they're that shape. :3
Mike is 5'11" and has relatively wide shoulders, he's 170-180lbs, so the suit would fit someone around that size, too. We can get more specific measurements if there is a serious buyer. I have some small scraps of the brown (that I will primarily use to redo the markings on the head), and some scraps of the cream if the buyer needed to let it out, or add to the legs/sleeves.
The costume would not come with any tags, badges, spiked bracelets or Mangle art. Since those things are Mike's and if the costume sells, it will become a different character with the new owner. Though I'm not opposed to drawing the new owner a new badge to go with the new character. :3
The other costume I have is Cathlamet, a wolf.
http://www.matrices.net/cathlamet.asp
If there was any interest in Cathlamet she would come with a few badges, and even the couple of LJ icons that I have for her. Also a nekerchief, and some scrap grey fur, I have very little (or possibly none) of the other colors, though. But the cream on her legs and belly is is DF fur.
Her head is all-foam based. Its currently unlined, though I am considering lining it for this potential sale. She does not have a fan, but is a very lightweight mask, her entire muzzle is hollow so she breathes very well. You'd be able to squish it relatively flat in case you needed to fit it in a suitcase. Nose is rigid but very lightweight pulp-based clay. The mouth doesn't really move, but when some people have tried it on, they have been able to get it to move somewhat. She has vents out the top of her head, hidden in the ears. I have eyelashes I can put on her (she currently has her eyelashes removed for now).
The bodysuit has some wear, this costume is very form fitting on me, so some seams have been resewn. The grey fur isn't that high of quality, but grey fur is pretty much a challenging color to find fur fabric of, so I took what I could get. Like mentioned above, I do have scraps of the grey, but it shows seams. The neck has a magnet closure.
Her legs have "loose" padding, and so she'll come with knee "slugs" and hock pads, both stuffed. With an attached tail that has a squeaker in the tip, and back zip-up closure. The zipper is not hidden, though. There's some repairs done on her tail from getting in and out of cars and it accidentaly got snagged. I have been able to put this costume on myself before. Though I have usually asked to have someone tuck in the handpaws or zip up the back the rest of the way before.
I am 5'5" and weigh around 180 lbs, so the costume should fit someone the same size or smaller than me, most of my weight distribution is in my thighs and hips, so I didn't add any extra butt padding on the costume since I *cough* don't need it. I don't remember how big my bra size is, I almost always wear a sports bra. But the chest of the costume is formed to fit a female body.
Her handpaws have canvas pawpads, and they have hard Sculpy claws, so they click really nice against stuff. Her feetpaws have wear, but I am willing to fix this up before they go to the new buyer. The paw pads are currently duck cloth canvas. And the paws were built on (I thiiink) a Ladies size 11 slip-on shoe.
Both costumes have Always been worn with UnderArmor underclothes. And have been kept clean, maintained, and brushed out. They are kept in a room Turbo (my dog) is not allowed.
Please e-mail me if you have an offer or are interested. Then we can discuss things further. My e-mail address is sara at matrices.net
The first one I have is Mangle, an Akita.
http://www.matrices.net/mangle.asp
Since Mangle is one of
malameux's characters we made up just to be his fursuit, Mike asked me to change Mangle's facial markings to be less like Mangle and make it become a new character for the buyer. Primarily less black on the face, and probably taking off the white on the top of his snout, and making his eyes friendlier. It will still be an Akita, but just not Mangle. I'd be able to work with the potential buyer on this, but I'm not going to be changing the foamwork too much.Its an all-foam based head, unlined, non-moving jaw. Switch-on/off Velcro-in 9v-operated fan in the muzzle would be included. There's vents in the top of the head(out the ears) to help exhaust heat, and there's wire in the ears (they have some limited posability to help tweak their shape). The mask itself is very light for its size, the muzzle is hollow, and can mostly squish flat if it needs to be packed in a suitcase. Nose is rigid but very lightweight pulp-based clay. A neckpiece is attached to the mask, and would go over top of the bodysuit (rather than being tucked in)
Handpaws have canvas pads on them with lightweight claws. Feet are size 12, Mike wears 12's and reports that they have a little extra room, but not a lot, so they may be too small if you have larger than size 11 1/2 to 12 sized feet. They have canvas pads layered with rubbery protective coating, fur covers the remaining bottoms on the footpaws, and shows some light wear.
The bodysuit is in very good condition. The costume overall only saw a few outings, mainly fursuit parades at cons, and photo shoots. The tail is seperately attached to the outside of the bodysuit, there are small belt-holes to thread a belt through. Zipper-enterance is on the back of the costume with a pull-string attached. Its concealed by a flap with magnet closure. I've always helped Mike get in the costume (he's never really had the desire to fursuit by himself) so I wouldn't be able to report how easy it is to get into or out of since I've always been there to help him put it on. Though I can make a video of how to put it on to illustrate if needed. All the padding is seperate and not mounted to an undersuit or the bodysuit, it comes with stuffed knee padding, butt padding, and carved foam hock (heel) padding. The knee pads do have faces drawn on them, and have been nicknamed "the slugs" just since they're that shape. :3
Mike is 5'11" and has relatively wide shoulders, he's 170-180lbs, so the suit would fit someone around that size, too. We can get more specific measurements if there is a serious buyer. I have some small scraps of the brown (that I will primarily use to redo the markings on the head), and some scraps of the cream if the buyer needed to let it out, or add to the legs/sleeves.
The costume would not come with any tags, badges, spiked bracelets or Mangle art. Since those things are Mike's and if the costume sells, it will become a different character with the new owner. Though I'm not opposed to drawing the new owner a new badge to go with the new character. :3
The other costume I have is Cathlamet, a wolf.
http://www.matrices.net/cathlamet.asp
If there was any interest in Cathlamet she would come with a few badges, and even the couple of LJ icons that I have for her. Also a nekerchief, and some scrap grey fur, I have very little (or possibly none) of the other colors, though. But the cream on her legs and belly is is DF fur.
Her head is all-foam based. Its currently unlined, though I am considering lining it for this potential sale. She does not have a fan, but is a very lightweight mask, her entire muzzle is hollow so she breathes very well. You'd be able to squish it relatively flat in case you needed to fit it in a suitcase. Nose is rigid but very lightweight pulp-based clay. The mouth doesn't really move, but when some people have tried it on, they have been able to get it to move somewhat. She has vents out the top of her head, hidden in the ears. I have eyelashes I can put on her (she currently has her eyelashes removed for now).
The bodysuit has some wear, this costume is very form fitting on me, so some seams have been resewn. The grey fur isn't that high of quality, but grey fur is pretty much a challenging color to find fur fabric of, so I took what I could get. Like mentioned above, I do have scraps of the grey, but it shows seams. The neck has a magnet closure.
Her legs have "loose" padding, and so she'll come with knee "slugs" and hock pads, both stuffed. With an attached tail that has a squeaker in the tip, and back zip-up closure. The zipper is not hidden, though. There's some repairs done on her tail from getting in and out of cars and it accidentaly got snagged. I have been able to put this costume on myself before. Though I have usually asked to have someone tuck in the handpaws or zip up the back the rest of the way before.
I am 5'5" and weigh around 180 lbs, so the costume should fit someone the same size or smaller than me, most of my weight distribution is in my thighs and hips, so I didn't add any extra butt padding on the costume since I *cough* don't need it. I don't remember how big my bra size is, I almost always wear a sports bra. But the chest of the costume is formed to fit a female body.
Her handpaws have canvas pawpads, and they have hard Sculpy claws, so they click really nice against stuff. Her feetpaws have wear, but I am willing to fix this up before they go to the new buyer. The paw pads are currently duck cloth canvas. And the paws were built on (I thiiink) a Ladies size 11 slip-on shoe.
Both costumes have Always been worn with UnderArmor underclothes. And have been kept clean, maintained, and brushed out. They are kept in a room Turbo (my dog) is not allowed.
Please e-mail me if you have an offer or are interested. Then we can discuss things further. My e-mail address is sara at matrices.net
_rain
Just something to think about. :3
I am such a freak for your suits ;-; I really wish you did commissions, My fiance and I would both get them from you <333