FA+
Shop
Now that the ovens installed next adventure is working on=
9 years ago
General
Hunting is not a sport. In order for it to be a sport,.. both sites must know they're playing a game!!
My car.
Now that I have the oven installed and working in my house, and working quite well have used it to cook a fresh ham and some other thing also have used it on regular baked and use the connection settings on some other stuff, well I bake some cookies some chocolate chip and white chocolate chip cookies, well I'm a Babyfur what did you expect me to cook?
So now it is going to be buying the tools that I desperately need, for instance I am buying a compact set of hand tools for instance sockets and other things I will need to disassemble the car and reassemble it also some specialty tools to remove and install the harmonic balancer, was looking at renting these tools that I need but it costs more to rent them than it does to just buy them and have them also will be needing some jack stands which I can get at Walmart fairly cheap $27.00 for 3 ton set of Jack stands also buying a compression tester and cylinder leak down tester, just to make sure that they compression and everything on all four cylinders is correct.
Will be replacing, timing belt and water pump, rocker arms and rocker arm shafts with the hydraulic lash adjusters are both intake and exhaust valves may be replacing the camshaft depending on how it looks and how it mike's out when I get down to it being sick cars coming up on 100,000 miles will be replacing the camshaft positioning sensor and the camshaft positioning sensor disruptor.
Also will be replacing the cooling fans assembly which comes with both fans, also all of the belts and hoses as they are original and the thermostat and thermostat housing and the coolant.
And once all of that is done I will be working on the stereo system will be putting in a five channel amp new front and rear speakers and a 10 inch sub woofer for a little bit of base this will also be on a second battery that will be in the trunk. But more on that later.
Now that I have the oven installed and working in my house, and working quite well have used it to cook a fresh ham and some other thing also have used it on regular baked and use the connection settings on some other stuff, well I bake some cookies some chocolate chip and white chocolate chip cookies, well I'm a Babyfur what did you expect me to cook?
So now it is going to be buying the tools that I desperately need, for instance I am buying a compact set of hand tools for instance sockets and other things I will need to disassemble the car and reassemble it also some specialty tools to remove and install the harmonic balancer, was looking at renting these tools that I need but it costs more to rent them than it does to just buy them and have them also will be needing some jack stands which I can get at Walmart fairly cheap $27.00 for 3 ton set of Jack stands also buying a compression tester and cylinder leak down tester, just to make sure that they compression and everything on all four cylinders is correct.
Will be replacing, timing belt and water pump, rocker arms and rocker arm shafts with the hydraulic lash adjusters are both intake and exhaust valves may be replacing the camshaft depending on how it looks and how it mike's out when I get down to it being sick cars coming up on 100,000 miles will be replacing the camshaft positioning sensor and the camshaft positioning sensor disruptor.
Also will be replacing the cooling fans assembly which comes with both fans, also all of the belts and hoses as they are original and the thermostat and thermostat housing and the coolant.
And once all of that is done I will be working on the stereo system will be putting in a five channel amp new front and rear speakers and a 10 inch sub woofer for a little bit of base this will also be on a second battery that will be in the trunk. But more on that later.
Pandr P. Panda
artists you may want to commission
http://www.furaffinity.net/user/revvyrabbit
http://www.furaffinity.net/user/caileran/
http://www.furaffinity.net/user/gusjustgus1/
http://www.furaffinity.net/user/sergalinu/
http://www.furaffinity.net/user/komi/
http://www.furaffinity.net/user/benihimeshido/
http://www.furaffinity.net/user/wolfpup549/
http://www.furaffinity.net/user/prettykitty13/
http://www.furaffinity.net/user/thefallenpony/
Personal Quotes
"The difference between good and evil, Depends on which side of the line that you're standing on" form Pandr
"Before man as a species should venture into the stars, They must first learn to live as one people" form Pandr
"The very young do not always do as they are told" form The Nox
"No one person is more valuable than another" form Lady Gaga
artists you may want to commission
http://www.furaffinity.net/user/revvyrabbit
http://www.furaffinity.net/user/caileran/
http://www.furaffinity.net/user/gusjustgus1/
http://www.furaffinity.net/user/sergalinu/
http://www.furaffinity.net/user/komi/
http://www.furaffinity.net/user/benihimeshido/
http://www.furaffinity.net/user/wolfpup549/
http://www.furaffinity.net/user/prettykitty13/
http://www.furaffinity.net/user/thefallenpony/
Personal Quotes
"The difference between good and evil, Depends on which side of the line that you're standing on" form Pandr
"Before man as a species should venture into the stars, They must first learn to live as one people" form Pandr
"The very young do not always do as they are told" form The Nox
"No one person is more valuable than another" form Lady Gaga
How much would you charge to do a 96 chevy s10 v6?
And would I have to go to Texas?
It's a loooooooooooooooooooooooooooooooooooooooooooong story!
You've seen that truck in one of my photos.
Its the red s10 behind the chevy blazer.
I bought it in 2014 from a guy and I was led to believe that it was a blown head gasket. .. .
So I thought to myself. .."I could fix that!".
Bought it and drove the truck to the city limits of midlothian and that's where it stopped!
Called my friend and he pulled me to his house.
I took one head off and those cylinders was full of water!
Mainly the center one and the back one closer to the firewall had a chunk of it's cylinder wall broke off!
So I thought that I better get another motor or block.
Then all hell broke loose and my motor in my van went out with a vengeance!
I found out the hard way that those toyota previas have this deterioration head gasket problem!
It starts drinking water for no reason at all and hydro lock!
Anyway, same thing as the s-10! Except that I had to remove moto/transmission from underneath my van!
I think my van didn't care that I had a stroke and recovering from it!
But I removed the head and had it checked and found out that it was cracked!
So I bought a low mileage jdm engine and installed it.
All with use of my right side.
So the s-10 had to sit on the back burner for now!
Now the s10. .. I bought a used motor from a fast talking guy through Craigslist.
He claimed that he just took it out of his truck to hotrod it out!
Yeah right. .. I found out that the motor had a bad connecting rod.
He gave me 75 bucks back! So I got it 225.00 bucks.
So I was planning on yanking the motor out of my s10 and use the crank and a good piston rod assembly from it and put into the moor I bought.
But whenever I started unbolting the motor in the s10.. ,that's when all hell broke loose again!
2015 was the wettest year on record for central texas!
I haven't tried to crawl under that filthy s10 since October of 2015!
I'm industrious! I have most of the stuff to work with!
If you were in my area and had all of the stuff and everything and all I had to do was replace the crank and connecting rod piston and the ring everything and put new bearings and seals and everything probably would only cost you about $350.00 for me to do the labor, was never a really expensive mechanic when I did stuff on my own or at my house and I would give the same service to anyone as they would get at the shop.
You can hone the cylinder walls too?
It's been sitting in my storage unit for a year now and I saw rust trying to form on the walls and I sprayed wd-40 in them...
Just a couple of bolts to remove to get the other motor out..
The way the rain keeps falling. .
I'm not tickled to crawl under that truck!
I could throw both motors in the van and bring them you.
I been to Panama city once.
Before I loose my cool and put that thing right back on Craigslist and sell it!
Also before you pack everything up and start your way over here remember that my kids probably would not get along with your kids so you would have to have someone take care of them while you're gone and I do not have a engine stand nor in engine hoist or any trees to use a come along with.
I live in Ruskin Florida which is just on the outskirts of Tampa down a little bit from there still in Hillsborough County right off of 75. While you have to go down College Avenue to 41 and then over to Golf City Road and then I am right there.
But you are more than welcome to come on down if you like.
Having my stroke in 2012 was like getting hit by a tornado !
I had to let go of the house I was renting and sell most of my tools and stuff during rehabitation from my stroke.
Even had to give away all my German Shepherds .
2012 was the worst year for me to be alive.
I had to sell my Isuzu trooper. ...
I hate owning one car! That van showed me it's worst as I was trying to get back on my feet.
But things are going a little smoother ....
Your children won't have to worry about a thing Iffin I drop by.
I'll see about the motor.
I would love to leave the state of Texas!
You have any pretty good flea markets out that way?
Since you're a master chef,can you cook a velvet cake?
I would love to have a moist one.
I've been meaning to ask you that fur the longest.
I know how to make a "Red Velvet Cake" from scratch I also know how to make a "4 Layer Black Forest Cake" that is a four layer chocolate cake with whipped cream and cherries for fillings and toppings. Also know how to make make several other cakes, and pies but almost all of my recipes are from scratch using fresh ingredients and everything.