Hello! I have for sale a Brand new, never used 4 pair eye mould.
I originally made this for myself but I have no resin left, so I'm selling it to get money for more resin.

Seen I have no resin, I dont have example of casts, but these are the eyes it was cast from http://i.imgur.com/5uPxMDU.jpg they are 30mm and about 9mm at thickest point.

The mould is about 20mm thick, leaving no weak spots, having 11mm of silicon under the thickest part of the eye so there no worries for having it tear through it! It's super flexible and will easily pop the eyes out of it when ready to demould them.

Some of the holes had overhang on them (as seen here http://i.imgur.com/14yDBt2.jpg 2nd hole, top row), as where silicon had seeped under the eyes, but this will in no way affect the casting, if anything it'll keep resin coming up over the edge from over fill so you won't have messy edges on the eyes, the actual eye part/dip in the mould is perfectly fine, no bubbles or anything.

Shipping within Australia will be about $18. International about $25. Shipping may be a lot cheaper than this! This is just what I'm assuming because of it's length, if it is any cheaper I will refund the difference and send you a copy of the receipt as proof. It will be sent via padded parcel so its super safe and will be sent the same day that full payment is cleared provided the Post Office is still open. I would like full payment within a week of the end of Auction, if you need extra time because you don't get paid til say, 2 days after. That's fine! Please let me know first.

If you have any questions, feel free to ask!

Auction link ; http://www.furbuy.com/auctions/1045257.html