Okay here we added the brass eyelets. thats 57 screw in brass eyelets.... my fingers were sore after that. 5 packets of them also from the dollar tree from a picture hanging packet. Thats 3 for each finger section 2 on top, and 1 in the middle on the bottom, but only 2 on each finger tip. you'll also need a row across the top of the knuckles and on the palm you;ll use them as guides. I wanted to use the picture wire from that as the control wires, but it tended to kink and hang up. I then ran clear plastic tubing through the eyelets I put on the palm and hot glued it into place. I used the springs from 14 click pens stretched between the eyelets on the back of the hands, this will pull the fingers back into place, since I couldn't use the wire I used heavy duty fishing line. I tied off one end of the line to the finger tip eyelet and thread it through the eyelets on the bottom of the fingers, and threaded it through the corresponding control tube.

So how it works is you will pull the control wire it'll curl the finger, then when you release the springs will pull it back into place