FA+
Shop
286
Views
Views
9
Favorites
Favorites
Category
Artwork (Traditional) / Fursuit
Species Dragon (Other)
Size 1200 x 800
File Size 389.9 kB
Report this content
More from DracoLoricatus
Listed in Folders
Here's a close-up shot of this dragon tail commission I made, showing the engravings down the spine.
The engravings were done with a laser cutter, which oxidizes the surface of the aluminum to a bright white. Interestingly, the aluminum oxide is significantly stronger than elemental aluminum, so the engravings are very robust.
Anyway, if you're interested in getting a tail from me, here's my tail ordering guide: http://www.furaffinity.net/journal/2485549/
Feel free to drop me a note!
The engravings were done with a laser cutter, which oxidizes the surface of the aluminum to a bright white. Interestingly, the aluminum oxide is significantly stronger than elemental aluminum, so the engravings are very robust.
Anyway, if you're interested in getting a tail from me, here's my tail ordering guide: http://www.furaffinity.net/journal/2485549/
Feel free to drop me a note!
Category Artwork (Traditional) / Fursuit
Species Dragon (Other)
Size 1200 x 800px
File Size 389.9 kB
Listed in Folders
The weave for the scales is a Japanese 4-in-1 pattern, with the scales being the node rings connected to their neighbors by the normal rings. If you're curious to learn, The Ring Lord has a quick tutorial video on how to weave scales on the top of their scales product page: http://theringlord.com/cart/shopdis.....email+Supplies
As for other weaves to learn, I highly suggest learning European 4-in-1 as a universally useful weave.
As for other weaves to learn, I highly suggest learning European 4-in-1 as a universally useful weave.
Comments