FA+
Shop
1635
Views
Views
9
Favorites
Favorites
Category
All / Tutorials
Species Horse
Size 1280 x 732
File Size 97.7 kB
Report this content
More from CeshionCo
A side by side comparison of DVC and PhazonAlloy (PA).
DVC and PhazonAlloy work with in different Genres. DVC is Toony and Semi-realist while PA is monsters and horror. They both rock their respective genres!
PhazonAlloy is more of a 'masculine' or "Feral" work. You need some more foam work on his to make it look great once furred*, but is more versatile in this way.
Dvc is 'feminine' and Semi-toony silhouette.
Quality: Same, both blanks I got were "damages" DVC was thin and had a split lip. PA's the Layers were splitting apart. Both heads were comped, and the fixes were easy.
Fit: Same, both needed the sides of the mask to be flared out a bit for 24+ inch heads
Vision: DVC, has better vision due to the angle and length of muzzle. But you are not flying blind in PA's.
Bonus: PhazonAlloy, you can get hand sculpted lips, teeth and Painted eyes installed on PA's (Plus LED work). DVC can't due to being too busy and not having any molds.
Price: PhazonAlloy: Cut/Hinged+Jawset+3D 3mm eyes+mesh+elastic+eyelids: $160 While DVC Cut/Hinged+3D 3mm eyes+mesh+elastic+eyelids: $188 (LEDs extra)
Over all Winner: Consistently open and producing custom quality sculpts and epic painted eyes for all, at affordable price, PhazonAlloy is the champ for this round!
*You can't just fur a raw resin blank! Add foam, please!
DVC: fav.me/d59lmgc
PhazonAlloy: www.furaffinity.net/view/75219…
My finished PA Head: fav.me/d63iz9z
My Finished DVC head: WIP
DVC and PhazonAlloy work with in different Genres. DVC is Toony and Semi-realist while PA is monsters and horror. They both rock their respective genres!
PhazonAlloy is more of a 'masculine' or "Feral" work. You need some more foam work on his to make it look great once furred*, but is more versatile in this way.
Dvc is 'feminine' and Semi-toony silhouette.
Quality: Same, both blanks I got were "damages" DVC was thin and had a split lip. PA's the Layers were splitting apart. Both heads were comped, and the fixes were easy.
Fit: Same, both needed the sides of the mask to be flared out a bit for 24+ inch heads
Vision: DVC, has better vision due to the angle and length of muzzle. But you are not flying blind in PA's.
Bonus: PhazonAlloy, you can get hand sculpted lips, teeth and Painted eyes installed on PA's (Plus LED work). DVC can't due to being too busy and not having any molds.
Price: PhazonAlloy: Cut/Hinged+Jawset+3D 3mm eyes+mesh+elastic+eyelids: $160 While DVC Cut/Hinged+3D 3mm eyes+mesh+elastic+eyelids: $188 (LEDs extra)
Over all Winner: Consistently open and producing custom quality sculpts and epic painted eyes for all, at affordable price, PhazonAlloy is the champ for this round!
*You can't just fur a raw resin blank! Add foam, please!
DVC: fav.me/d59lmgc
PhazonAlloy: www.furaffinity.net/view/75219…
My finished PA Head: fav.me/d63iz9z
My Finished DVC head: WIP
Category All / Tutorials
Species Horse
Size 1280 x 732px
File Size 97.7 kB
I have to say, I don't really like the DVC blank at all.
It just doesn't look like a horse to me.
The PhazonAlloy blank has an... acceptable nose shape, but that's the only thing I like about it.
I hope I don't sound like I'm being mean! Just that I've spent rather a long time looking at horse faces.
I love horses ^U^
Anyways, I've NEVER seen a single horse blank I liked, untill I saw this one.
http://www.furaffinity.net/view/11977370/
[Although it's not finished yet.]
It just doesn't look like a horse to me.
The PhazonAlloy blank has an... acceptable nose shape, but that's the only thing I like about it.
I hope I don't sound like I'm being mean! Just that I've spent rather a long time looking at horse faces.
I love horses ^U^
Anyways, I've NEVER seen a single horse blank I liked, untill I saw this one.
http://www.furaffinity.net/view/11977370/
[Although it's not finished yet.]
Actually I would argue the PhazonAlloy's looks more like a deer than horse!
You can hurt my feelings I just bought them! But I am not around horses, just dogs and house cats.
You also gotta remember that not all suits are going for accurate real life horse shape (most just make Digitigrade legs anyways)
Front View http://www.furaffinity.net/full/12158128/
I got a few more pics you you want me to post them
Since you are around horses does the mask I made hold up? http://fav.me/d63iz9z
You can hurt my feelings I just bought them! But I am not around horses, just dogs and house cats.
You also gotta remember that not all suits are going for accurate real life horse shape (most just make Digitigrade legs anyways)
Front View http://www.furaffinity.net/full/12158128/
I got a few more pics you you want me to post them
Since you are around horses does the mask I made hold up? http://fav.me/d63iz9z
To really be fair in my descision, I opened your front view in paint, and lined out where I would put the padding, ears and other details.
The PA blank needed quite a bit of padding, seeing that it has no cheeks and brow structure which all horses have.
But after I drew that on and gave it some long eyelashes to give it a more relaxed look, it looked just fine.
From the front, the raw blank somehow calls to mind a dragon x3
I think it's the eyelids.
The DVC blank had the cheeks just right, but the brow was far too high and the snout is just way messed up.
I couldn't get it to look right at all.
It just has the nose, barely even a bottom lip, and no top lip.
I suppose a toony suit has more artistic freedom than a realistic one, though, so I can't say anyhing for that.
As for a realistic head, I'd prefer the PhazonAlloy blank ^U^
For the head you made, that's really beautiful!
It looks more like a draft horse than the horses I'm around, though, because it has more of a "roman nose".
But the face is beautiful.
If I'd made it, though, I'd change the ears a little bit, because they're a little flat looking.
I made a [unfinished because I'm lazy] set of horse ears, once.
I gave them the normal shape at the top, and flared the bottom out so I could curl them inwards and sew the edges together, to make a 3d ear with the "cupped base" hoofed mammals have :3
Heheh, sorry for rambling! xD
The PA blank needed quite a bit of padding, seeing that it has no cheeks and brow structure which all horses have.
But after I drew that on and gave it some long eyelashes to give it a more relaxed look, it looked just fine.
From the front, the raw blank somehow calls to mind a dragon x3
I think it's the eyelids.
The DVC blank had the cheeks just right, but the brow was far too high and the snout is just way messed up.
I couldn't get it to look right at all.
It just has the nose, barely even a bottom lip, and no top lip.
I suppose a toony suit has more artistic freedom than a realistic one, though, so I can't say anyhing for that.
As for a realistic head, I'd prefer the PhazonAlloy blank ^U^
For the head you made, that's really beautiful!
It looks more like a draft horse than the horses I'm around, though, because it has more of a "roman nose".
But the face is beautiful.
If I'd made it, though, I'd change the ears a little bit, because they're a little flat looking.
I made a [unfinished because I'm lazy] set of horse ears, once.
I gave them the normal shape at the top, and flared the bottom out so I could curl them inwards and sew the edges together, to make a 3d ear with the "cupped base" hoofed mammals have :3
Heheh, sorry for rambling! xD
It is probably the need for more foam that makes PA's look like a deer to me. I did add a bit of foam and asked for a stern eyes. http://fav.me/d5u8ncs
That is it, the cheeks. Horses got 'em cheeks! Is it the angle of the snout? The plus side of it pointing down more is a smaller blind spot. It dose need lips. I was hoping that DVC would make a silicone set. So squishy.
Yay, I got it right!! He wanted a 'light' draft horse, with a stern look. You are right the ears are one denominational.
Please ramble on!
That is it, the cheeks. Horses got 'em cheeks! Is it the angle of the snout? The plus side of it pointing down more is a smaller blind spot. It dose need lips. I was hoping that DVC would make a silicone set. So squishy.
Yay, I got it right!! He wanted a 'light' draft horse, with a stern look. You are right the ears are one denominational.
Please ramble on!
Ah, sorry I hadn't seen this message!
Hmmm, no, what I think bothers me about the snout is that it's so round and little.
I geuss that's how most people sort of make horses more human like, but I just prefer horsies to have big noses :3
Anyways, as for the nose you made, AHHHHHHH THOSE NOSTRILS ARE SO PERFECT 8D
You did really well! That's exactly how they're supposed to be shaped ^U^
Hmmm, no, what I think bothers me about the snout is that it's so round and little.
I geuss that's how most people sort of make horses more human like, but I just prefer horsies to have big noses :3
Anyways, as for the nose you made, AHHHHHHH THOSE NOSTRILS ARE SO PERFECT 8D
You did really well! That's exactly how they're supposed to be shaped ^U^
Comments