I've found that overlocking multiple layers of fur may produce a fairly unsightly and unstable seam. Instead, I usually overlock the individual pieces, and then use a top-stitch to put the pieces together. This will give you a great looking seam as well as removing much of the seam bulk.

Another alternative is to use a really loose needle thread and then pull the pieces apart to create a faux flat-lock seam.

I can't really tell from the photo, but I can't see an oil line in the window... you might wanna check that. :)

Thank you so much for the advice!!

I order some oil, so I just threaded it and check the tension. Now I wait, like a kid with a new toy without batteries.

I'm sure you know the hot tip on rethreading, yes? If not...

Never unthread your serger. Instead, when you want to change cones, snip the old thread above the old cone, tie a know in the string with the new thread, and pull it through. You'll probably have to rethread the needle, but this makes changing threads go really fast. I do the same with the top-stitcher.

I hardly use the chain stitcher on mine, but there have been occasions where I was glad to have it.

Keep these babies well fed with oil and blow out the dust occasionally and it should last you forever. :)

Oh I love that tip when I first learned it. That tip is best tip in the whole serger world!!!!
Thanks again for the advice!

Very nice. Been curious to try a claw at serging at some point. Seems like it is worlds better for making some repairs compared to a standard lockstitch machine.

There are some pros and cons to using a Serger/Overlock.
I would not say a serger is better at repairs or construction but it is better for a overall finished look then just a lock stitch.
A serger is not best on very tight turns or small details, there is also a chance of cutting too much off and altering the fit.


Thank you for the favs by the way.