So a very rough sketch of what I do. I am an industrial saw opperator at a copper factory. I change my own saw blades, keep up with quality of cuts, measure the outter diameter as well as the inner wall of tubes every two hours, i have to cut to a specific length which can range 10 ft, 17 ft 1 inch, 20 ft, 45ft, 60ft and 100 ft and sometimes odd measurements between. I have to keep track of each tube and make sure the bundles dont go over the weight limit, i also have my own paper work to fill out along with printing tickets for every bundle, order my own saw blades, and clean up. I work four to five nights straight pulling 12 hour shifts. I consider myself a damn hard worker and i will be getting cross trained to run other machines in my work area. On top of my job stress from others is a issue at times im the only female on my crew but there are women in the factory whom dont know me and dislike me already but to hell with them. Im trying to get outta debt to get a farm and to get my dad early retirement from there. Yes he works there too but got his hand crushed years ago. The place is dangerous but this hoss will work herself to death if necessary. I work for what i try to have, no handouts here.