FA+
Shop
128
Views
Views
0
Favorites
Favorites
Category
Crafting / All
Species Unspecified / Any
Size 973 x 1280
File Size 100.1 kB
Report this content
More from lelsiskoo
-Hey everybody !
This is my electric motor for bicycle scheme that I realized myself in 1 week ^^
I am open for any advice and improvement :)
It is quite possible that there are still errors x)
-Hey les gens !
Je vous présente mon schéma de moteur électrique pour vélo que j'ai réalisé moi même en 1 semaine ^^
Je suis ouvert pour tout conseil et amélioration :)
Il est fort possible qu'il y ait encore des erreurs x)
This is my electric motor for bicycle scheme that I realized myself in 1 week ^^
I am open for any advice and improvement :)
It is quite possible that there are still errors x)
-Hey les gens !
Je vous présente mon schéma de moteur électrique pour vélo que j'ai réalisé moi même en 1 semaine ^^
Je suis ouvert pour tout conseil et amélioration :)
Il est fort possible qu'il y ait encore des erreurs x)
Category Crafting / All
Species Unspecified / Any
Size 973 x 1280px
File Size 100.1 kB
Thank you very much for your comment, I am honored to speak with you ^^
I am a student and I started electronics there is only 1 year, it is a friend who helped me creation :)
I did not really understand your question... (because of my English)... you mean the diode which is near the engine ? is a diode which eliminates parasites voltage spikes that can be created by the NE 555... this system can cut power in an instant, and with the help of a potentiometer, we can adjust the engine power through an analog throttle. this system helps save time and components in the circuit... the printed circuit (blue) is regulated by the regulator 10 Volts (brown)... LEDs are used for the lights, it is a consumption of 10 W instead of 30 W to an incandescent lamp... 4 battery 12 V is used in series to 48 V (more than enough for the engine)... and finally, we use a voltmeter for battery charging and an ammeter for the comsomation directly...
I hope I have said everything ^^'
I have everything translated by Google translation, called me if you had a concern for understanding, I will try to tell you :P
I am a student and I started electronics there is only 1 year, it is a friend who helped me creation :)
I did not really understand your question... (because of my English)... you mean the diode which is near the engine ? is a diode which eliminates parasites voltage spikes that can be created by the NE 555... this system can cut power in an instant, and with the help of a potentiometer, we can adjust the engine power through an analog throttle. this system helps save time and components in the circuit... the printed circuit (blue) is regulated by the regulator 10 Volts (brown)... LEDs are used for the lights, it is a consumption of 10 W instead of 30 W to an incandescent lamp... 4 battery 12 V is used in series to 48 V (more than enough for the engine)... and finally, we use a voltmeter for battery charging and an ammeter for the comsomation directly...
I hope I have said everything ^^'
I have everything translated by Google translation, called me if you had a concern for understanding, I will try to tell you :P
Youre welcome and flattering me a bit^^ nice to speak with you and sorry for the delay of my answer.
So you have much time to learn :D and you have a nice friend.
great explination, and a very good circuit. Did you calculate the cooling for your FET?
and what diods will oyu use for dejam the motor? and its alwas good to place a capacitor with some µF and a z-diode with 15V on the source VCC and ground of the NE555 so it will be save against voltage peaks if the diode beside the engine is not fast enough.
and dont worry, my englsih still have to improve too^^
and hope you will manage to build it and we will see some pictures of you project^^
So you have much time to learn :D and you have a nice friend.
great explination, and a very good circuit. Did you calculate the cooling for your FET?
and what diods will oyu use for dejam the motor? and its alwas good to place a capacitor with some µF and a z-diode with 15V on the source VCC and ground of the NE555 so it will be save against voltage peaks if the diode beside the engine is not fast enough.
and dont worry, my englsih still have to improve too^^
and hope you will manage to build it and we will see some pictures of you project^^
Comments