If you put a scroll with instructions for a nefarious deed into his mouth does he become your minion?

Nice. Would like to see the mesh.
May I ask what printer did you get?

M3D printer

https://printm3d.com/themicro/

Attractive price... but I need to improve my sculpting skills before I buy a printer. :/
Thanks for the link.

Have you tried Daz3D?

It's kind of the successor for Poser and can export scenes as OBJ files. If you're on Windows 8.1 or later, you can use their free 3D Builder app to clean the OBJ, fix any errors and then emit it as an STL file which can be loaded by M3D's software.

Okay, that's no sculpting tool but it's for free so I will probably check it out. ^^
Thanks. :3

Adobe Meshmix does sculpting and it's free. And I think the company that makes ZBrush now has a free lightweight version.

Wow, that's pretty impressive!

great start :3

A dremel comes in handy with a small burr to trim off the excess.

Or a nice xacto blade, extra sharp.

The printer has a serious problem with the filament heater. It tends to slide up the filament nozzle and so the filament is either too cool or too hot. I'm trying to find a way to anchor the heater into one place, which should make it work much better. Also their software is pretty clumsy to use and makes really odd support material.

Unfortunately, they don't support direct GCode so I can't easily use other software with it.

Nice You will get better at it. had a 3D Persa Mendel since 2011 first print ended up like yours payed 375.00 for mine and assembled it looks like your carve/layer height is too High it has to be 0.1mm below your Nozzle width also measure your filament along a 30cm length and use the average as your filament width.

Their software is very limited - it doesn't offer any way to enter those kinds of parameters and they don't have any way to send GCode directly to the printer (or at all, really), so I can't use other software.

I'm reverse engineering their software and I'm planning on making a GCode server for it so I can do the kind of fine tuning you describe.

There's also a problem with the filament heater. It slides up and down the nozzle, which causes wildly inconsistent printing. Often I just end up with a pile of angel hair. I'm looking at disassembling it and anchoring it down at the right place.

What sort do you have? Just picked up a Printrbot simple metal and working on fine-tuning for stringing and bed adherence.

This print looks super complex but really nice!

M3D printer

https://printm3d.com/themicro/

How much did they charge for it. if it was over 245.90 you where charged too much I have payed a little more and I can us mine with plastic or Clay or Powder just by changing the Head or Base and I can change the Gcode right on the Fly what do your files have to be STL

$299 but it was a kickstarter... and of course, when you contribute, you don't know exactly what you'll get. We were told it would eventually support GCode directly and it might in the future, but right now it doesn't.

I was looking for a compact, portable system that used stock filaments and needed as little fiddling as possible. It's looking like the most recent firmware upgrade and the new version of their software has improved things a lot... we shall see.

I have it printing a model in PLA right now and so far, it looks fairly good.

With Kickstarted I help fund the Matterform. A really nice 3D scanner

Made here in Canada, as matter of fact. :)

That may be my next purchase - I have a 3DSystems' Sense scanner, but it's not that good especially on small things.

How much would you charge for your figures? I understand its still in testing phases but i love collecting figures and even painting and such. I. Think itd be really kool to have a fellow furs piece on my shelf

I don't generally charge for things like that, TBH. Just makes things a hassle. :)

Find me at BLFC and I'll give you one. :)

If you want something specific, let me know and I'll print it. I'll probably have the printer with me at the con, too.

You're shitting me right?! That'd be fucking amazing! Like idk what id ask for specifically lol. Anything you'd be willing to print, if you want i could try abd like paint one for you there for yah if you want. Im decent and painting stuff. Never done anything3d printed though. Itd just be awesome to have another furs work in my collection

R or G? :)

well ummm.... i honestly would love something R rated haha i have a lot of scantily clad anime figures lol. G would be a bit easie to display though lol i'll let you decide :D

Alas i never found you. :< oh well still awesome work hope to see more

I did keep an eye out for you. Maybe at another con.

hopefully, no worries about this con though, just a mishap of location lol still amazing work :)

Well, there were a LOT of people at BLFC... it was hard to find anyone. I an old friend of mine almost miss meeting up with me entirely even though we'd both been there since Thursday.

i had the same situation hapen w/ one of my buds. oh well it still was an awesome con