FA+
Shop
6968
Views
Views
446
Favorites
Favorites
Category
All / Fursuit
Species Hyena
Size 848 x 1280
File Size 306.1 kB
Report this content
More from crystumes
Listed in Folders
SOLD
FINALLY THE TIME HAS COME If you remember this blank over a year ago that's been literally sitting around unused all of that time, http://www.furaffinity.net/view/12042725/
HUZZAH! HERE HE IS!
If you are a patron of mine you will have seen this guy weeks ago ;)
I had a blast making this guy just right.
The fur on the front chest panel was cut with the pile going out to the side. the middle neck panels were cut with the fur going towards the frontal panels. and the back of the head palomino fox piece was cut with pile going straight upwards!
Believe it or not every piece of this besides the palomino fox fur on the back of the head was pure WHITE fur. ALL paint rubbed and airbrushed! for the best realism I could get!
His hood is very large. and this head would fit a 24 inch, would look a bit large on a smaller head and would need more padding and tighter straps!
He is most definitely a one of a kind creature.
He IS for sale! and he even has a small partial! http://www.furaffinity.net/view/16713710/
IF YOU KNOW WHY I NAMED HIM XANDER YOU GET A COOKIE <3
( I also have two other masks up for sale/ offer/ bid! take a look!
Otter: http://www.furaffinity.net/view/16690023/
Husky: http://www.furaffinity.net/view/16713133/
FINALLY THE TIME HAS COME If you remember this blank over a year ago that's been literally sitting around unused all of that time, http://www.furaffinity.net/view/12042725/
HUZZAH! HERE HE IS!
If you are a patron of mine you will have seen this guy weeks ago ;)
I had a blast making this guy just right.
The fur on the front chest panel was cut with the pile going out to the side. the middle neck panels were cut with the fur going towards the frontal panels. and the back of the head palomino fox piece was cut with pile going straight upwards!
Believe it or not every piece of this besides the palomino fox fur on the back of the head was pure WHITE fur. ALL paint rubbed and airbrushed! for the best realism I could get!
His hood is very large. and this head would fit a 24 inch, would look a bit large on a smaller head and would need more padding and tighter straps!
He is most definitely a one of a kind creature.
He IS for sale! and he even has a small partial! http://www.furaffinity.net/view/16713710/
IF YOU KNOW WHY I NAMED HIM XANDER YOU GET A COOKIE <3
( I also have two other masks up for sale/ offer/ bid! take a look!
Otter: http://www.furaffinity.net/view/16690023/
Husky: http://www.furaffinity.net/view/16713133/
Category All / Fursuit
Species Hyena
Size 848 x 1280px
File Size 306.1 kB
Listed in Folders
Crys....its official.
You have surpassed ever other realistic fursuit maker I've ever watched or seen. Like damn you fucking blew them all away. I mean the others are still good. Great in fact.
But you are the fucking Carl E. Akeley of my fursuit world.
Please let me make it as a fursuit maker so I can have the income needed to get a costume by you.
Damn you came so far in such a short time. ;3;
You have surpassed ever other realistic fursuit maker I've ever watched or seen. Like damn you fucking blew them all away. I mean the others are still good. Great in fact.
But you are the fucking Carl E. Akeley of my fursuit world.
Please let me make it as a fursuit maker so I can have the income needed to get a costume by you.
Damn you came so far in such a short time. ;3;
He's beautiful and such a realistically plausible head. Like, you really made it a priority to capture the neck circumference of a feral hyena and made it into an anthro, but with the feral characteristics of the feral form of the animal. His neck is very wide and fluffy and not tapered like a human neck. Realistic heads always look strange when they are on the human manikins which have a very creepy form anyway with the elongated and protruding back cranium and then the skinny tiny necks. All though, I know that's because its on the mannikin. This guy, however, he does not do that and he's not even on a human head that's normal! So beautiful!
I had an inquiry about the "Middle" panels. I don't want to put you on the spot, I just want to know, where are they exactly? Well done, because I cannot find them. Everything else I can discern for reference. If not, that's fine, I can figure it out. I want the wide neck and not a neck that tapers because this actually gave me an idea for a future fursuit head. I want a big luffy "Boa" of neck fur. Like a regal curvature enclosing the animal's neck on both sides, but it will make his neck look elongated because his species has a longish neck. It will look better that way too. I've seen fursuits with neck floofs, but they look like they are strangling the fursuiter's neck.
I had an inquiry about the "Middle" panels. I don't want to put you on the spot, I just want to know, where are they exactly? Well done, because I cannot find them. Everything else I can discern for reference. If not, that's fine, I can figure it out. I want the wide neck and not a neck that tapers because this actually gave me an idea for a future fursuit head. I want a big luffy "Boa" of neck fur. Like a regal curvature enclosing the animal's neck on both sides, but it will make his neck look elongated because his species has a longish neck. It will look better that way too. I've seen fursuits with neck floofs, but they look like they are strangling the fursuiter's neck.
it took a moment! XD but here's what I mean by the middle panel! :) https://scontent-sea1-1.xx.fbcdn.ne.....mp;oe=55FFD840
what I did with this pattern, is I cut two bulky neck/shoulder/back shapes out of thin foam. (or honestly you could use a cut shape out of a large cardstock board and put it under the fur for neck shaping and make the pattern over that! I normally do anthro shaping but this guy I wanted to be special :) wanted the bulky back thing going on.
what I did with this pattern, is I cut two bulky neck/shoulder/back shapes out of thin foam. (or honestly you could use a cut shape out of a large cardstock board and put it under the fur for neck shaping and make the pattern over that! I normally do anthro shaping but this guy I wanted to be special :) wanted the bulky back thing going on.
I've bulked up a neck before. I don't like shoving my fursuits in people's faces, but this is the first and last successful run for a neck "Shape" I really liked. http://www.furaffinity.net/view/8428793/. That was also my very first fursuit. I just wanted to share that. I need to go it again and I think I will on my next head, which is a tauntaun. I want him to look regal and bushy. The curved neck made the neck look longer as well and I was going to do that for my tauntaun. I just used inch thick foam layered in slabs,curving down to make the neck curve.
I didn't realize I was doing what you were talking about, lol.
I didn't realize I was doing what you were talking about, lol.
I'm still skeptical I figured that out. I don't remember how. All I remember is I wanted it bad enough I was trying everything. Now that I'm better at making suits, its, funny, I've developed more fear and intimidation for some reason. Probably, because I know what I want and I don't know how to get it and I have to experiment more, lol. If I have a dud that comes out, I'm stuck with it. I would have to wait a couple of months or a year or two before I went back and redid it, IF I wanted to redo it.
What are the specifications to the head? Is there a video of him in action? Head/full partial?
Beautifully designed ♡ Ive hoped to own one of your suits for a long time, maybe this guy is the one :)
Also. Curious if this is could be worn as female? Or is it a pretty male strict look?
Beautifully designed ♡ Ive hoped to own one of your suits for a long time, maybe this guy is the one :)
Also. Curious if this is could be worn as female? Or is it a pretty male strict look?
Comments