FA+
Shop
224
Views
Views
3
Favorites
Favorites
Category
Sculpting / Animal related (non-anthro)
Species Vulpine (Other)
Size 960 x 1280
File Size 172.5 kB
Report this content
More from Slyka
Listed in Folders
A friend gave me a 3D printed version of the low poly fox model I made for this image: http://www.furaffinity.net/view/11810556/
Category Sculpting / Animal related (non-anthro)
Species Vulpine (Other)
Size 960 x 1280px
File Size 172.5 kB
Listed in Folders
I've been working on/building them since the MakerBot Cupcake! it's been awhile!
Here's a few I've built:
http://i.imgur.com/VLdU96E.jpg
http://imgur.com/a/t6Yto
http://imgur.com/a/snlEs
The Printrbot is great for a cheap small printer! They've come a long way since their first kickstarter and have a good array of products!
For bigger ones I'd say the LulzBot TAZ or Ultimaker are nice machines, If you want to spend more time and less money, you can build kits yourself like a Prusa i3 or even a Delta type bot.
Here's a few I've built:
http://i.imgur.com/VLdU96E.jpg
http://imgur.com/a/t6Yto
http://imgur.com/a/snlEs
The Printrbot is great for a cheap small printer! They've come a long way since their first kickstarter and have a good array of products!
For bigger ones I'd say the LulzBot TAZ or Ultimaker are nice machines, If you want to spend more time and less money, you can build kits yourself like a Prusa i3 or even a Delta type bot.
Wow, your printers look amazing! That last one is huge :D
Printrbot just released a new model for $399 with a 4x4x5 inch print space, but it just came out and there isn't a lot of tests or reviews of it yet.
It looks like there is no option to put a heated bed on it, but I think for such a small size and for printing PLA that should be OK.
Once some more people have tested it and I can find some videos on youtube I think I'm gonna go for that.
The main thing I want to print is small 3D artwork and figurines, so the size should be fine for me.
Printrbot just released a new model for $399 with a 4x4x5 inch print space, but it just came out and there isn't a lot of tests or reviews of it yet.
It looks like there is no option to put a heated bed on it, but I think for such a small size and for printing PLA that should be OK.
Once some more people have tested it and I can find some videos on youtube I think I'm gonna go for that.
The main thing I want to print is small 3D artwork and figurines, so the size should be fine for me.
Thanks! They've taken awhile to build, but it's about the journey for me, so I don't mind!
The Play should be great! I'm sure you can look into fitting a heated bed onto it, if nothing else it should be easy just to stand off a piece of metal from the bed with some screws and put a heater mat on the underside of that. You'd only lose a half inch of build height maybe, but you'd have a heated bed!
A lot of people have good luck printing on PEI sheets or gluestick, elmer's glue-all, or hairspray cold with PLA, so you might be able to get away with that!
The Play should be great! I'm sure you can look into fitting a heated bed onto it, if nothing else it should be easy just to stand off a piece of metal from the bed with some screws and put a heater mat on the underside of that. You'd only lose a half inch of build height maybe, but you'd have a heated bed!
A lot of people have good luck printing on PEI sheets or gluestick, elmer's glue-all, or hairspray cold with PLA, so you might be able to get away with that!
Comments