FA+
Shop
234
Views
Views
7
Favorites
Favorites
Category
Photography / Miscellaneous
Species Unspecified / Any
Size 1280 x 1155
File Size 924.3 kB
Report this content
More from Sonomatic
Listed in Folders
"Let's get SERIOUS!" -Serious Sam
Sorry I haven't uploaded much art lately, school, and been in a model building mood .w. Still been drawing just haven't had anything ready.
But this is an accessory kit I just built now. It's a huge fucking minigun! Funny thing is this is intended for the 1/144 Build Fighter kits, but it fits 1/100 waaay better(and the handle you see there is specifically built for 1/100 kits) It looks so gnarly, the barrels action rotate too, and has a couple other configurations, has a tripod and extra parts so it can be attached to some backpacks or anything with the proper polycap.
The kit you see here is the Wing Gundam Ver Ka EW. Very amazing kit was very fun to build and is VERY pretty!
Sorry I haven't uploaded much art lately, school, and been in a model building mood .w. Still been drawing just haven't had anything ready.
But this is an accessory kit I just built now. It's a huge fucking minigun! Funny thing is this is intended for the 1/144 Build Fighter kits, but it fits 1/100 waaay better(and the handle you see there is specifically built for 1/100 kits) It looks so gnarly, the barrels action rotate too, and has a couple other configurations, has a tripod and extra parts so it can be attached to some backpacks or anything with the proper polycap.
The kit you see here is the Wing Gundam Ver Ka EW. Very amazing kit was very fun to build and is VERY pretty!
Category Photography / Miscellaneous
Species Unspecified / Any
Size 1280 x 1155px
File Size 924.3 kB
Listed in Folders
It's not such a hard deal.
For example: You don't need glue for the GunPla Models and even if the Building Manuals are in Japanese, they are very good to understand.
All parts are Numbered. For example: Take part 1 of Layer B1 together with Part 3 of Layer PN 1 and then put Part 3 of Layer B1 on top or it.
See, really easy. xD
After one or two Model Kits, you will have it in you.
But, for the Start, I would say you to take a SD GunPla or a HG GunPla.
RG, MG and over are more complex and not for beginners.
All you need for start, is a Modelling plier, a cutting mat and tweezers for the Decals... and maybe a Scalpel or a hobby knife.
With the Plier you cut the Parts from the Layer, with the Knife or some Sandpaper you clean the connection Points were you have cut the Parts from the Layer and the rest is following the Plans.
With Tweezer and Cotton swabs, sou put the Decals in Place and if you have made it correct, you become a Gunpla out of it.
Pretty Easy.
For example: You don't need glue for the GunPla Models and even if the Building Manuals are in Japanese, they are very good to understand.
All parts are Numbered. For example: Take part 1 of Layer B1 together with Part 3 of Layer PN 1 and then put Part 3 of Layer B1 on top or it.
See, really easy. xD
After one or two Model Kits, you will have it in you.
But, for the Start, I would say you to take a SD GunPla or a HG GunPla.
RG, MG and over are more complex and not for beginners.
All you need for start, is a Modelling plier, a cutting mat and tweezers for the Decals... and maybe a Scalpel or a hobby knife.
With the Plier you cut the Parts from the Layer, with the Knife or some Sandpaper you clean the connection Points were you have cut the Parts from the Layer and the rest is following the Plans.
With Tweezer and Cotton swabs, sou put the Decals in Place and if you have made it correct, you become a Gunpla out of it.
Pretty Easy.
You can get those tools pretty cheap, once you get a basic exacto set, sandpaper and nippers (but you can honestly just use the knives for cutting out parts if you're careful). I'm sure you have tweezers. XD Or even some q tips can help with decals. It's really not difficult trust me :3 and you can get HG kits for like 15 bucks, not bad. It wouldn't be a bad time to get into it either, kits have gotten so high quality they look great without any paint.
Not many panel lines to work with, unless i etch new ones =p Yeah I was thinking making the barrels silver and maybe some black to some of it would make it pop better. I was thinking of getting markers last night but they are priiiiicey >.< a basic set is as expensive as the gatling.
Yeah.
But sometimes they are in some sort of Discount on Amazon or Ebay.
So you only need to hould your eyes open.
At the Moment, there is another new "Marker" on the Way to me. Had only costs 4 Bucks and its something like a Marker Killer.
It should be work like a ink eraser I think.
Found it on Ebay, and thought this would be a good Idea.
The next Pack I think of buying is the Gundam Seed Pack, because of some Colors I don't have yet and need for some Models.
And I have buyed a original GunPla grey panelliner some Time ago.
It has a little different tip as some others non Originals, that I had in the Past.
I hope this will function better than them.
Hope to see more from you in the future too. ^^
But sometimes they are in some sort of Discount on Amazon or Ebay.
So you only need to hould your eyes open.
At the Moment, there is another new "Marker" on the Way to me. Had only costs 4 Bucks and its something like a Marker Killer.
It should be work like a ink eraser I think.
Found it on Ebay, and thought this would be a good Idea.
The next Pack I think of buying is the Gundam Seed Pack, because of some Colors I don't have yet and need for some Models.
And I have buyed a original GunPla grey panelliner some Time ago.
It has a little different tip as some others non Originals, that I had in the Past.
I hope this will function better than them.
Hope to see more from you in the future too. ^^
Comments