
Sorry guys! I forgot to edit this. but these are officially closed for now until I fill these orders. I've been slow on this and need to get all of these out before I take more!
Specifications:
*7 inches wide, 8 inches tall, 8 inches long from base to tip of snout.
*mouth can officially be cut entirely apart. and made into a cut and hinged blank if necessary (you MUST do this yourself) I refuse to do so for you. as I made it as a masquerade basic face mask. but for those gung ho interested in moving mouth go for it! I made it easier this time.
*1" eye blanks best
Only flaw: The tips of the teeth seem to pretty much always cast with bubbles. I'll hand sand each tooth for you. Some teeth don't fully cast . so they have a "broken tooth" look. I will try and ask if you are ok with a certain cast before sending but so far most of them have at least one broken tooth. and are each unique.
I intend on creating a lower jaw piece for this mask! that I can send along with the blanks were you interested in cutting and hinging. would be $9 for the bottom piece. $12 were I to make and include a tongue! (however I am not offering this at this time)
I can include blank 1" eye blanks for $5 extra. (these must also be ordered once I have the bulk funds)
Back edge cut and sanded
eye holes cut out
nostrils drilled out.
mouth completely drilled from one corner of the mouth to the other. (not cut all the way for hinging just the mouth)
primed with white primer.
Please Please note that I do not have the resin to cast any of these just yet. after a few orders I will be ORDERING NEW RESIN and will commence casting at that point. it takes roughly a week to receive resin after being ordered. Please allow AT LEAST A MONTH of creation time alone.
*your paypal email (for invoice)
*if you would like eye blanks included for $5 extra
*your full mailing address in the form you would write it on a letter. your full [REAL] name. and then address please.
Then I will list you below! :)
ORDERS:
1.gilligan blue eyes
2.gilligan violet eyes
3.latinvixen
4.kuhori (special) jaw piece
5. BGarts (very special painted)
6.son_of_ra with yellow eye blanks SENT
7.Yamishizen SENT
8. tankard (special c/h) eye blanks jaw piece
9.Sloth599 eye blanks
10. ShimaRoba eye blanks, jaw piece
CLOSED
etc. if applicable...
HUZZAH!!!! I have gotten so many inquiries into the dino blank I had. and the mold is so old, it's officially warped as well. The original was technically sculpt based off of an allosaurus. This guy has a real allosaurus/ t-rex feel. but I'll just call him a dino.
I wanted to make something also a little larger than the older blank as well!
Specifications:
*7 inches wide, 8 inches tall, 8 inches long from base to tip of snout.
*mouth can officially be cut entirely apart. and made into a cut and hinged blank if necessary (you MUST do this yourself) I refuse to do so for you. as I made it as a masquerade basic face mask. but for those gung ho interested in moving mouth go for it! I made it easier this time.
*1" eye blanks best
Only flaw: The tips of the teeth seem to pretty much always cast with bubbles. I'll hand sand each tooth for you. Some teeth don't fully cast . so they have a "broken tooth" look. I will try and ask if you are ok with a certain cast before sending but so far most of them have at least one broken tooth. and are each unique.
I intend on creating a lower jaw piece for this mask! that I can send along with the blanks were you interested in cutting and hinging. would be $9 for the bottom piece. $12 were I to make and include a tongue! (however I am not offering this at this time)
I can include blank 1" eye blanks for $5 extra. (these must also be ordered once I have the bulk funds)
Paint-your-own blanks are $80! They entail:
Back edge cut and sanded
eye holes cut out
nostrils drilled out.
mouth completely drilled from one corner of the mouth to the other. (not cut all the way for hinging just the mouth)
primed with white primer.
Please Please note that I do not have the resin to cast any of these just yet. after a few orders I will be ORDERING NEW RESIN and will commence casting at that point. it takes roughly a week to receive resin after being ordered. Please allow AT LEAST A MONTH of creation time alone.
YOU MAY ALSO PURCHASE THIS PARTICULAR PAINTED MASK!!!!! He is $130. will have straps and foam padding inside the mask! breathability is lovely in these guys! because of all of the drilled areas :)
I will not cut and hinge this painted mask.
all shipping is $15 priority in the US through usps including insurance! I only ship through the usps.
out of country shipping is $25 base ship. please note that it's much more difficult for me to get out of country packages shipped than it is for domestic. this will take a bit extra time in comparison.
full payment required in order to nab a slot!
I will take a whopping 15 slots!
Please send me the following in note!:
*your paypal email (for invoice)
*if you would like eye blanks included for $5 extra
*your full mailing address in the form you would write it on a letter. your full [REAL] name. and then address please.
Then I will list you below! :)
ORDERS:
1.
2.
3.
4.
5. BGarts (very special painted)
6.
7.
8. tankard (special c/h) eye blanks jaw piece
9.
10. ShimaRoba eye blanks, jaw piece
CLOSED
etc. if applicable...
Category All / Fursuit
Species Unspecified / Any
Size 1280 x 985px
File Size 441.8 kB
I want one of these blanks (just regular ready to paint blank, no eye blanks needed). Bill me at valentina.caicedo[at]gmail.com
Thank you
Thank you
Comments