Some of you might remember how I received this mask/head with broken horns thanks to DHL/USPS.
See: Broken...
http://www.furaffinity.net/view/10417291/
After first repair:
http://www.furaffinity.net/view/10435873/
After 3 1/2 years the second horn came apart at the old crack. No big deal however...I fixed the outer crack with epoxy glue, but I decided to do something on top of that:
Having the core foam AND the outer layer now glued, I thought it would be best to sand off both horns and give them a consistent new paint job.
And this is the result: Coppery faded horn tips int he middle and golden tips at the ends! Plus two layers of silk matte varnish with a hint of a glitter effect.
There's a very good chance that this is the last time I need to fix them. Any ideas for better paint jobs, i.e. designs? I'm always open to suggestions.
See: Broken...
http://www.furaffinity.net/view/10417291/
After first repair:
http://www.furaffinity.net/view/10435873/
After 3 1/2 years the second horn came apart at the old crack. No big deal however...I fixed the outer crack with epoxy glue, but I decided to do something on top of that:
Having the core foam AND the outer layer now glued, I thought it would be best to sand off both horns and give them a consistent new paint job.
And this is the result: Coppery faded horn tips int he middle and golden tips at the ends! Plus two layers of silk matte varnish with a hint of a glitter effect.
There's a very good chance that this is the last time I need to fix them. Any ideas for better paint jobs, i.e. designs? I'm always open to suggestions.
Category Fursuiting / Fursuit
Species Tiger
Size 1014 x 760px
File Size 276 kB
Hmm, I think I see that the Agiler is a serial port mouse, I see a Sata Cable, there is a partial schematic with two... I'd say 16 - 24 pin DIP's arranged together. One of the leads has "RDY" probably indicating that it could be a Parallel Port interface of some sort. Is that STING: Live in Berlin a card stock CD envelope?
Oh that was a little sketch done when I was reviving my Amiga 1200. Basically an adapter circuit (74LS38 and a 74LS74) for Shugart-Bus 3.5" floppies to the Amiga Interface, which is largely the same. One of the wires that needs some changes is the _RDY (Drive Ready, low active) pin.
Yes, Sting: Live in Berlin, CD album and DVD. Recorded in NTSC format, something like that is very unusual to find here. :)
Oh the mouse is for Amigas. Not serial but I had a serial version of it too.
Yes, Sting: Live in Berlin, CD album and DVD. Recorded in NTSC format, something like that is very unusual to find here. :)
Oh the mouse is for Amigas. Not serial but I had a serial version of it too.
FA+

Comments