FA+
Shop
665
Views
Views
1
Favorites
Favorites
Category
All / All
Species Unspecified / Any
Size 960 x 1280
File Size 1.01 MB
Report this content
★
More from Jacky
Listed in Folders
The Mason 30mm Dumptank RTA
( Clone )
This is my current setup... and ohohohoh. look at this monstah. It just fits good with my RX300.
* Pros
Large Ejuice Capacity (10mL)
Caved in Airflow for Better Flavor
Velocity Style post for easy coil installation
Using Beefy Flathead Screws instead of Small Hex Screws that strips like a bitch.
Wicking is not bad - if you do it right
* Cons
No Juice Flow Control
Leaks a lot. A LOT.
Top Portion's Gasket seal is not tight and will leak juice on you when you have it upside down
Wicking is a bit of pain in the ass ( Has slots that you need to stuff cotton into )
Not really great with high wattages ( Past 140 W is very unpleasant due to tighter airflow )
Small build deck compared to its massive size
* Verdict
If you want to just fill up your tank once and vape like a champ or just want to show off you got big shit, this is your thing,
But wicking is a bitch and if you don't wick it well it's gonna be one leaky bitch.
( Clone )
This is my current setup... and ohohohoh. look at this monstah. It just fits good with my RX300.
* Pros
Large Ejuice Capacity (10mL)
Caved in Airflow for Better Flavor
Velocity Style post for easy coil installation
Using Beefy Flathead Screws instead of Small Hex Screws that strips like a bitch.
Wicking is not bad - if you do it right
* Cons
No Juice Flow Control
Leaks a lot. A LOT.
Top Portion's Gasket seal is not tight and will leak juice on you when you have it upside down
Wicking is a bit of pain in the ass ( Has slots that you need to stuff cotton into )
Not really great with high wattages ( Past 140 W is very unpleasant due to tighter airflow )
Small build deck compared to its massive size
* Verdict
If you want to just fill up your tank once and vape like a champ or just want to show off you got big shit, this is your thing,
But wicking is a bitch and if you don't wick it well it's gonna be one leaky bitch.
Category All / All
Species Unspecified / Any
Size 960 x 1280px
File Size 1.01 MB
I've got 2 of the 40mm version and the Modfather/voltrove 41mm, The trick with the dumptanks is that if your coil bit will fit into the juice channel, your coil is going to be too small ID.
Also, the cotton doesn't have to go to the bottom of the channels, as long as it goes into and blocks at least the part in the deck, it'll work fine
Granted, both of mine 40's are authentics straight from Vapergate (we carry their RTA/RDA's & juice at the shop i work at) so no clue how bad the clones are in comparison to the real deal, neither of mine have sealing issues when flipped
Also, the cotton doesn't have to go to the bottom of the channels, as long as it goes into and blocks at least the part in the deck, it'll work fine
Granted, both of mine 40's are authentics straight from Vapergate (we carry their RTA/RDA's & juice at the shop i work at) so no clue how bad the clones are in comparison to the real deal, neither of mine have sealing issues when flipped
Considering the Authentic is 55-65 and the 40 is 70-80, that's pretty cheap, and the top seal is why it leaks. The authentics come with some thin plastic bits to put under the gasket if it gets loose to help seal it, No seal, no vacuum, No vacuum, Leak city.
http://i.imgur.com/tiRyERn.jpg
Two of them there, 40mm on a 4s Lipo PWM w/ custom tip, Voltrove 41mm on the same as you, just with a tron Carbon wrap from Zapwrapz
I continue to push the boundaries of "Sane" >.>
http://i.imgur.com/tiRyERn.jpg
Two of them there, 40mm on a 4s Lipo PWM w/ custom tip, Voltrove 41mm on the same as you, just with a tron Carbon wrap from Zapwrapz
I continue to push the boundaries of "Sane" >.>
Comments