(English below)
Nabend ihr Süßen Flauschepopos :3 <3
Lasst uns einmal tief Luft hohlen......... und euch dann unseren kleinen Zuwachs, der die letzten Wochenenden entstanden ist vorstellen :3. Auch werden wir mit ihm auf der EF an zu treffen sein :D wen sieht man den da so von euch?
...... Also, dass ist Maple ein kleiner Corgipillar (halb Corgi halb Raupe). Die Fühlerboppeln sind aus Resin und von dem lieben Alu von Fur your dream - Alu's little Fursuit forge gegossen. Der rest ist komplett von uns ;3
Kurz zu den Technischen Daten:
Augenbrauen sind verstell oder abnehmbar, genau wie der Ahornsirupsabber :3 und die Zunge.
Die Nase ist aus Kunstleder genau wie die Zähnchen.
Gebaut ist der Kopf auf einer speziellen Mashbase von uns.
Der Kopf ist mit dünnen Jerseybaumwollstoff gefüttert mit Kirschen drauf ;3.
Der Kiefer ist gewollt statisch kann aber auf gedrückt werden (zb zum Trinken oder ähliches)
Fotos von Boddy und co Folgen die Tage :D wenn es etwas kühler wird. So lange müsst ihr euch leider noch gedulden ^~^ aber es wird sich lohnen ;3
Erstmal aber eine gute Woche :D und passt auf euch auf bei der Hitze!!!
Wenn ihr uns verfolgen wollt guckt unbedingt mal hier:
https://t.me/joinchat/AAAAAEZXsYKmYI8VbgBgzQ
Euer Humming Bunnybee Team <3
_________________________
Good evening my little fluffbutts :3 <3
Let's all take a deep breath and then look at our freshly finished newbie :3. We will take him to EF too :D Are we gonna see any of you there?
This is Maple. He is a Corgipillar (Part Corgi Part Caterpillar). The sensors are out of resin and were made by Alu from Fur your dream - Alu's little Fursuit forge. The rest was made by us ;3.
Now some technical data:
The eyebrows are moveable and can be taken off just like the syrup drool and the tongue.
The nose and teeth are made of artistic leather. The head is based on a special mesh base made by us. The inside is layered with jersey cotton fabric with a cherry print ;3.
The jaw is static and can be pushed open (for drinking etc.)
We will provide photos of the body in the next few days :D We hope it cools down a little. You must be patient for a while, but it'll pay off! ;3.
Have a nice week :D and take care because of the heat!!!
If you want to follow us, be sure to check here:
https://t.me/joinchat/AAAAAEZXsYKmYI8VbgBgzQ
Your Humming Bunnybee Team <3
Nabend ihr Süßen Flauschepopos :3 <3
Lasst uns einmal tief Luft hohlen......... und euch dann unseren kleinen Zuwachs, der die letzten Wochenenden entstanden ist vorstellen :3. Auch werden wir mit ihm auf der EF an zu treffen sein :D wen sieht man den da so von euch?
...... Also, dass ist Maple ein kleiner Corgipillar (halb Corgi halb Raupe). Die Fühlerboppeln sind aus Resin und von dem lieben Alu von Fur your dream - Alu's little Fursuit forge gegossen. Der rest ist komplett von uns ;3
Kurz zu den Technischen Daten:
Augenbrauen sind verstell oder abnehmbar, genau wie der Ahornsirupsabber :3 und die Zunge.
Die Nase ist aus Kunstleder genau wie die Zähnchen.
Gebaut ist der Kopf auf einer speziellen Mashbase von uns.
Der Kopf ist mit dünnen Jerseybaumwollstoff gefüttert mit Kirschen drauf ;3.
Der Kiefer ist gewollt statisch kann aber auf gedrückt werden (zb zum Trinken oder ähliches)
Fotos von Boddy und co Folgen die Tage :D wenn es etwas kühler wird. So lange müsst ihr euch leider noch gedulden ^~^ aber es wird sich lohnen ;3
Erstmal aber eine gute Woche :D und passt auf euch auf bei der Hitze!!!
Wenn ihr uns verfolgen wollt guckt unbedingt mal hier:
https://t.me/joinchat/AAAAAEZXsYKmYI8VbgBgzQ
Euer Humming Bunnybee Team <3
_________________________
Good evening my little fluffbutts :3 <3
Let's all take a deep breath and then look at our freshly finished newbie :3. We will take him to EF too :D Are we gonna see any of you there?
This is Maple. He is a Corgipillar (Part Corgi Part Caterpillar). The sensors are out of resin and were made by Alu from Fur your dream - Alu's little Fursuit forge. The rest was made by us ;3.
Now some technical data:
The eyebrows are moveable and can be taken off just like the syrup drool and the tongue.
The nose and teeth are made of artistic leather. The head is based on a special mesh base made by us. The inside is layered with jersey cotton fabric with a cherry print ;3.
The jaw is static and can be pushed open (for drinking etc.)
We will provide photos of the body in the next few days :D We hope it cools down a little. You must be patient for a while, but it'll pay off! ;3.
Have a nice week :D and take care because of the heat!!!
If you want to follow us, be sure to check here:
https://t.me/joinchat/AAAAAEZXsYKmYI8VbgBgzQ
Your Humming Bunnybee Team <3
Category Crafting / All
Species Unspecified / Any
Size 1080 x 1080px
File Size 186.2 kB
FA+

Comments