![Click to change the View [NO] Crow Shapeshifter Demon Partial by InariKitsune](http://d.furaffinity.net/art/fursuitreview/1553479100/1553479100.fursuitreview_iv0bang.jpg)
FURSUIT REVIEW FORM
Your Username
http://www.twitter.com/pupspace
http://www.furaffinity.net/user/temapup/
https://www.weasyl.com/~pupspace
https://inkbunny.net/PupSpace
Name of Maker and Links
Inari Kitsune Kemono/OokamiFAME/Emiko Inari
https://www.facebook.com/InariKitsunekemofurs/
Your Relationship With The Maker
The maker WAS a friend when the item was purchased, but they are NOT a friend now
Item Being Reviewed
Character name, type of commission, etc. This will be used to help title the submission on FursuitReview
Crow the Shapeshifter Demon Full Partial in a kemono style as a commission.
Species of Character
Corrupt Angel
Character Concept Art
https://imgur.com/h9SavlR
Photos of Completed Product
https://imgur.com/iV0bang
Price Paid
1000 USD paid in a lump sum
Do you have any prior experience with fursuits?
This was my first fursuit, but I have since had several more, 5 partials and 1 fullsuit other than this one.
How many hours have you worn/used the item(s) you're reviewing?
Give your best estimate.
10+
Date Commissioned or Bought
June 2017
Date Completed or Shipped
July 30 2017
Shipping Origin
USA
Did the maker finish the item by the expected date (ETA)?
EARLY - the item was delivered before the ETA
Did you tell the maker about any issues you had?
Yes, I reported several issues upon arrival and when the suit started falling apart less than two months in.
HEAD
The following questions ask you to explain how satisfied you are with each feature of the head of the costume. If you are reviewing only a set of ears, your answers would also go in this section.
Wear Satisfaction
Please describe how it is to wear this piece of your costume.
The suit is loose, and a chunk of foam fell out the back of the head and had very little glue on it when it fell out. After this the suit no longer fit my head. It is not lined, just raw foam with bits of plastic skeleton poking out, especially on my nose when wearing.
Ventilation is not great, as it is a kemono suit and the mouth is tiny.
Vision is okay. There's a giant blind spot in the center, I have to turn my head to see, and the plastic covering cannot easily be removed, but I was told it would be removable, trapping steam and heat.
I found a needle in the ear area of the suit at one point.
Appearance Satisfaction
Please describe how satisfied you are with how your costume piece looks from the outside.
Symmetry is okay, there's a bit of an issue with the markings looking off-center, but it's okay. The gray does not match the design, but I was told this.
Uneven shaving, and it was hard to keep upkept.
Fur is perfect!
The eyes were actually great looking, they just trapped heat. No expressions, but they work. They were supposed to be follow-me, but didn't work well.
The maker was the best option at the time and I had a friend working with them. But they only do Kemono suits and the head was huge compared to how I'd have liked it.
HANDS AND FEET
The following questions ask you to explain how satisfied you are with each feature of the hands and feet of the costume.
Wear Satisfaction
Please describe how it is to wear these pieces of your costume.
Hands were scruffy and itchy, left lots of fur on my hands. Slid off easily because they were "one size fits all" when the maker refused to wait for me to get a hand measurement Mostly comfortable. Feet were a little itchy because the type of shoe used.
Quality was bad. Seams popped all over the hands and wrists. Foam and base of foot fell out during my second time wearing the suit, leaving me with a fabric shell and a shoe. I "voided warranty" by putting the shoe back in the foot so I could continue the meet.
Shoe is on a swim shoe, which could have been a sweat-trapper but really just leaked sweat into the foam. Cleaning was difficult.
Appearance Satisfaction
Please describe how satisfied you are with how your costume pieces look from the outside.
Feet were huge and chunky, hands were narrow and the circles for the paw "beans" were uneven.
There was almost no shaving on the hands, they were extremely long-furred.
Fur felt great.
Hands and feet had no claws or details other than the paw pads, which were okay but weirdly lined and sewed.
There were added markings on the paws, as she originally didn't have paw pads, but the arm markings were missing.
TAILS
The following questions ask you to explain how satisfied you are with each feature of the tail(s) of the costume.
Wear Satisfaction
Please describe how it is to wear these pieces of your costume.
It was the best part! It was very comfortable and very good for butt wiggles.
The straps started to pop off, and the seams were popped all over. Straps are not secure and the tail was falling apart. Padding was great!
Appearance Satisfaction
Please describe how satisfied you are with how your costume pieces look from the outside.
The sewing of the markings was great!
Shaving could use some work. The underside could have been shaved closer to help cleaning.
Fur felt great at first, but with use became hard to remove all the gunk.
The colors were great! I would have preferred an armature in hindsight. Very heavy but that was a good thing.
Matched great as can be!
Special Attachments and Features
Please describe how satisfied you are with any extra features your tail(s) have.
It was a 5 foot floor dragger tail, worked great for what it was. Again, seams and straps were not great. Very messy sewing.
WINGS
The following questions ask you to explain how satisfied you are with each feature of the wings of the costume.
Wear Satisfaction
Please describe how it is to wear these pieces of your costume.
Too tight, even though I added several inches for seam allowance in what I sent. I needed help. They were a separate part. Seams were awful and different straps were used on the wings (white) as compared to the tail (black). I could not use my arms when using the wings. There were two sets (medium and "chibi") though the chibi wings didn't look like a chibi design.
Appearance Satisfaction
Please describe how satisfied you are with how your costume pieces look from the outside.
They didn't sit right on my back and were lopsided. Shaving was pretty good, as the long back fur and short tip fur/fleece were awesome to look at.
Fur felt great, colors were great, did not match the concept art very well, as the wings on the concept were a different style.
OVERALL SATISFACTION
The following questions ask how satisfied you are with the overall buying experience, including your interactions with the maker and the resulting final product.
How was your concept art realized?
I used my own art and they made an additional sketch.
I didn't like the simplification and over-Kemono-ization of the design. The head could have been much smaller if less foam was used.
The small things (no gradient on the tail, which I admit would have been impossible, the wings being flat red) added up and made me dislike the items. The eye's outlines were colored on with permanent marker.
How well does everything fit together and match up?
Seams were not great, and the seam gaps were constant.
The tail was further from my body/less secure, while the wings were way too tight and constricting.
I was OKFAME's first commission, but later commissions were equally spotty.
How easy was it to initially contact the maker for a quote?
Too easy, she was very open and helpful throughout the whole building process. It was her behavior after the suit started falling apart that wasn't good.
How satisfied are you with the response time from the maker?
How long did it take the maker to get back to you?
Response time was pretty great, but she asked that we change Messenger groups several times, added and removed people, and then demanded I only respond via her new page after she rebranded.
How satisfied are you with the professionalism and customer service and of the maker?
Maker was very young at the time of building, and while they were okay at keeping up with things, they were not very good at problem solving.
How satisfied are you with how long your project took to complete?
The project was finished in about a month. I made no specific time deadline and she worked with it well.
Are you happy with the product you received?
No. I loved it at first but I quickly realized a fursuit should last years, not months. Two months in and only two serious wears in it was falling apart.
Describe your overall experience with this maker.
Pros:
Quick, dry, and dirty first time suit.
Nice when things go her way
Cons:
Made some rude comments at different points
Not very professional (made bashing videos, etc)
Product received was nothing compared to suits I've got for less than half of the price.
FINAL SCORE
FursuitReview scores by having you answer the following question: Would you recommend this maker to another?
Pick one of the scores below that you feel honestly reflects your commissioning experience as a whole, including the quality of your item(s), the appearance, and how you were treated by the maker.
NO
[YES] Positive = The reviewer would recommend this maker to another
[OK] Neutral = The reviewer may or may not recommend this maker, depending on certain circumstances (reviewer clarifies what these are)
[NO] Negative = The reviewer would not recommend this maker to another, unless the maker significantly changes their practices
Like what we do? Consider donating, supporting us on Patreon, or buying from our Fursuit Gear store.
Interested in writing a review of your own? Click here!
Comments for negative reviews are now closed on FA. If you’d like to leave a comment on a negative review, you may do so on the website.
Category Fursuiting / All
Species Unspecified / Any
Size 405 x 602px
File Size 39.8 kB
Comment posting has been disabled by the submission owner.
Comments