So I got this cleaned up and put new ground wire braid on the board and also replaced wires that the outer wire plastic protection was cut on one wire so replaced that.
And I also replaced the general illumination wiring that came from the transformer as I believe the old yellow wiring was just to crispy baked to keep cutting it and repinning it.
I did that once already and the wire broke so the red wiring you see used to be yellow.
I did not have any yellow solid wiring so just used red and then used masking tape and marked "This used to be yellow but is now red." xD
So yeah I enjoyed cleaning this up and making sure things do not short out. xD
I also put in a new socket and new line filter and redid the soldering to those as the original was just terrible. o.O