
A sea slug that i made for the realistic rumble, I have a lot of moral boosting from wolfire and pyrate cove, I'm not sure i'll ever enter into something like that again. after learning that half of the judges were just popufurs. the rules were extremely constricting to any small or hobbyist maker. it was made entirely out of foam and initially I couldn't used the acrylic half spheres that's the go to standard in realistic heads. they later months in changed that rule. Didn't mater as more of the people who won made wolves. the fur on the slug was supposed to be sew lush fur that I've sewed on sharks and eels, but the place shipping assured me it was but it wasn't. it was so slippery that it didn't hold the airbrush even with fixer. Thank fully it sold at plex 22 to a younger fur who I hope has a lot of fun with it. I may just have a cheaper experimental fur suit every year for the younger furs.
-
the tar poss was something I worked on when the slug had beaten me into a creative dump, based on la brae, which I hope to see one day, LEDs and a tail. it sold at plex 22. Base was a commission sculpt from dragonartist15
-
The purple gator [by spookysniper] was a lot of fun went over to Wolfire's place as we played dentists. there was a bit of a problem with the number of teeth we had v2 what we needed so I made a few sculpted gold ones. this one came with a mega chunky tail that wolfire and I had done the previous year for a manokit. it was a nice big chunk with a little bit of wiggle at the end. it has the same belly scales on the neck down to the tail, because I felt that was very important. also sold at plex 22
-
The turtle {base by crystumes] was made before the gator was finished as I was using the same neck pattern. The turtle has all of the experimental bits, so the turtle was the first pancake and that why the gator looks pretty amazing. I still have the turtle and its up on the dealers den currently. Sold!
-
I did another rip away face! this year I wanted more realistic eyes and to do a Dino skull, the stars aligned and I was gifted the chance to do both! the base was also by Dragonartist15. I opted for a colored base red for the fur I had on hand and then failed to use in the fur design OTL. This was a much better face than my last rip away face and the eyes had LEDs in them. I was overall rather pleased with how this came out. once the group that purchased he poss, and gator realized that the face could be removed collectively lost it. Reminds me that I need to look into getting a square account. The two faced raptor also sold at megaplex22.
-
the cat was made on a bushange's [sp] skull cat base made in time for a Halloween. I found this base in my elastic bit, let a few twitter followers pick what the wanted to see, a blue cat with tufted ears was the winning result and so I made this kitty and was quite pleased with the reception. Horns are dvc saber teeth that I made into horns. It sold quickly which was nice.
-
Next is a deer partial I did with wolfire! the base is made by twinbluechimera, which we did some modifications with. It was fun to actually do a collaboration with a fur I had forgotten how nice it is to work with someone who also knows that they are doing. The deer is still up for grabs, and when sold I'll be sending half of the $ to wolfire.
-
Then in a fit of trying to get though projects faster I did a massive inventory and the was in despair because at this point i have 20 bases. I attempted to sell a bunch in including ones I wanted to work on and of course only base that sold was the one I was looking forward too >:L but I needed the $$ due to an unplanned dental emergency. *shakes fist*
-
So I took the head that had the most amount of work on it and started. As a treat, I really like the painted faces bases. with all that texture carved into the base seems like a mistake to cover it up with fur. base by weaselsoneasels and I slapped a DVC jawset and tongue in. The petal kitsune is in a different color spectrum that I don't typically work in but I really like how they turned out. the glitter paints don't really show to great in the pictures you can see some of it on the bottom gum. this is just a head. all fabric seen will be given to the buyer for matching. sold at FWA 2023
-
Finally the last partial of the year and I still have not listed this one. A furred face, thankfully I used some really nice short piled fur so I don't shave the face. DVC hons, tongue and teeth used. base by howmetalhorrors, and eyes by saltypupsutios. this partial is nearly done I just need to get the hands worked on like the linger and claw install. They aren't up on the yet. Was hoping to get an offer or two. U_U
-
I've made 70 heads/partials and I feel accomplished. 2023 looks to be having a quite a few body suits, some painted heads, and a few more experimental ideas. first up is that kemono cat full suit. I can safely say kemono style isn't something I will be advertising, once that is out I expect to breath easier and as a reward, paint a horse. then I will be working on getting my first fursuit Tide up to my standards, as I have gifted the suit to a friend, and they're more petite in size. Should be a bit easier i hope once we get the foam leggings made.
-
2023 plex I hope to have a few more skulls and some bone tails. Though if my current stuff doesn't sell then it will also be at the convention. which could be good or bad depending on how much stuff I need to haul back and forth.
https://www.thedealersden.com/searc.....user_id=106629
-
the tar poss was something I worked on when the slug had beaten me into a creative dump, based on la brae, which I hope to see one day, LEDs and a tail. it sold at plex 22. Base was a commission sculpt from dragonartist15
-
The purple gator [by spookysniper] was a lot of fun went over to Wolfire's place as we played dentists. there was a bit of a problem with the number of teeth we had v2 what we needed so I made a few sculpted gold ones. this one came with a mega chunky tail that wolfire and I had done the previous year for a manokit. it was a nice big chunk with a little bit of wiggle at the end. it has the same belly scales on the neck down to the tail, because I felt that was very important. also sold at plex 22
-
The turtle {base by crystumes] was made before the gator was finished as I was using the same neck pattern. The turtle has all of the experimental bits, so the turtle was the first pancake and that why the gator looks pretty amazing. I still have the turtle and its up on the dealers den currently. Sold!
-
I did another rip away face! this year I wanted more realistic eyes and to do a Dino skull, the stars aligned and I was gifted the chance to do both! the base was also by Dragonartist15. I opted for a colored base red for the fur I had on hand and then failed to use in the fur design OTL. This was a much better face than my last rip away face and the eyes had LEDs in them. I was overall rather pleased with how this came out. once the group that purchased he poss, and gator realized that the face could be removed collectively lost it. Reminds me that I need to look into getting a square account. The two faced raptor also sold at megaplex22.
-
the cat was made on a bushange's [sp] skull cat base made in time for a Halloween. I found this base in my elastic bit, let a few twitter followers pick what the wanted to see, a blue cat with tufted ears was the winning result and so I made this kitty and was quite pleased with the reception. Horns are dvc saber teeth that I made into horns. It sold quickly which was nice.
-
Next is a deer partial I did with wolfire! the base is made by twinbluechimera, which we did some modifications with. It was fun to actually do a collaboration with a fur I had forgotten how nice it is to work with someone who also knows that they are doing. The deer is still up for grabs, and when sold I'll be sending half of the $ to wolfire.
-
Then in a fit of trying to get though projects faster I did a massive inventory and the was in despair because at this point i have 20 bases. I attempted to sell a bunch in including ones I wanted to work on and of course only base that sold was the one I was looking forward too >:L but I needed the $$ due to an unplanned dental emergency. *shakes fist*
-
So I took the head that had the most amount of work on it and started. As a treat, I really like the painted faces bases. with all that texture carved into the base seems like a mistake to cover it up with fur. base by weaselsoneasels and I slapped a DVC jawset and tongue in. The petal kitsune is in a different color spectrum that I don't typically work in but I really like how they turned out. the glitter paints don't really show to great in the pictures you can see some of it on the bottom gum. this is just a head. all fabric seen will be given to the buyer for matching. sold at FWA 2023
-
Finally the last partial of the year and I still have not listed this one. A furred face, thankfully I used some really nice short piled fur so I don't shave the face. DVC hons, tongue and teeth used. base by howmetalhorrors, and eyes by saltypupsutios. this partial is nearly done I just need to get the hands worked on like the linger and claw install. They aren't up on the yet. Was hoping to get an offer or two. U_U
-
I've made 70 heads/partials and I feel accomplished. 2023 looks to be having a quite a few body suits, some painted heads, and a few more experimental ideas. first up is that kemono cat full suit. I can safely say kemono style isn't something I will be advertising, once that is out I expect to breath easier and as a reward, paint a horse. then I will be working on getting my first fursuit Tide up to my standards, as I have gifted the suit to a friend, and they're more petite in size. Should be a bit easier i hope once we get the foam leggings made.
-
2023 plex I hope to have a few more skulls and some bone tails. Though if my current stuff doesn't sell then it will also be at the convention. which could be good or bad depending on how much stuff I need to haul back and forth.
https://www.thedealersden.com/searc.....user_id=106629
Category Fursuiting / All
Species Unspecified / Any
Size 1271 x 1280px
File Size 2.16 MB
Comments