FA+
Shop
87
Views
Views
1
Favorites
Favorites
Category
3D Models / Miscellaneous
Species Unspecified / Any
Size 1497 x 1198
File Size 528.8 kB
Report this content
More from truekaiser
Listed in Folders
This is the other thing I have been working on. Chapter 5 of my current story is in the editing stage. I really have no other place to upload a pic and felt i should share this with my followers.
It is a case for the orange pi 5 plus that once the exterior cladding is on, will look like a retro case. It is based around a post with m3 brass inserts. Some bars with it too, for the hdd cage.
Yes there's an optical drive, for reasons, and that's a tfx psu. Yes an sfx is smaller in footprint, but low wattage non sketchy sfx's are hard to find and more expensive than this name brand tfx
It is a case for the orange pi 5 plus that once the exterior cladding is on, will look like a retro case. It is based around a post with m3 brass inserts. Some bars with it too, for the hdd cage.
Yes there's an optical drive, for reasons, and that's a tfx psu. Yes an sfx is smaller in footprint, but low wattage non sketchy sfx's are hard to find and more expensive than this name brand tfx
Category 3D Models / Miscellaneous
Species Unspecified / Any
Size 1497 x 1198px
File Size 528.8 kB
Listed in Folders
The pla machine yes about 250ish mm is the max so i keep it about 200-220mm. The frankensteined ender 5+ has been dedicated to pteg. but takes a bit over 2x as long to print something the same size. I do not like letting the machines running when i am out of the house for hours, like for work.
Comments