Up close, high flash, of the attached reflective eye. This shows the amount of detail still visible at peak flash in a camera. It shows that the fitment is far better than the flawed Walmart print, as well as the print resolution. This closeup demonstrates well that the black part of the image still reflects, something that will be omitted in the final design. This also shows a potential issue I was concerned with from the start. You can see the high gloss of the vinyl abruptly stops at the eye blank. This disrupts the idea of a continuous 3D eye. I intend to eventually sand and gloss the eye blank, but I want to make sure first that doing so won't defeat the "follow me" illusion.