Well, its done!
I started to do this some time ago, it will work to move ears and other things from a fursuit. I have done the 2.0 version but it was too big, so i started the 3.0. You can see the 2.0 working here
http://www.youtube.com/watch?v=WjFUvQwVFWY

Well, now about the 3.0!
I will post some pictures here, but if you want... you can read the portugueses desc here http://www.pawson.com.br/index.php/.....onic-fursuit-v

Here is testing the micro controller (Atmega328 with arduino uno bootloader)
http://i.imgur.com/fflik.jpg
http://i.imgur.com/NeXVY.jpg
This is the controller
http://i.imgur.com/onbBo.jpg
Starting...
http://i.imgur.com/gd1FH.jpg
http://i.imgur.com/amZEl.jpg
http://i.imgur.com/VQX02.jpg
http://i.imgur.com/DI7wW.jpg
http://i.imgur.com/CZppL.jpg

All started with this:
http://i.imgur.com/j4jGL.jpg
Some things more
http://i.imgur.com/sVEqm.jpg
http://i.imgur.com/xDwPL.jpg
Some help need using my notebook
http://i.imgur.com/hhVgj.jpg
This pin bar is to reprogram if need
http://i.imgur.com/vXy8w.jpg
First test
http://i.imgur.com/WSYTy.jpg (using blink on pin 13)
Some wires
http://i.imgur.com/3cRzb.jpg
More wires
http://i.imgur.com/nmdW9.jpg
Manual control
http://i.imgur.com/6kuiL.jpg
Mess level its over 9000!
http://i.imgur.com/NNxop.jpg
Done but not closed
http://i.imgur.com/LWTJ9.jpg
The box
http://i.imgur.com/sqZ4M.jpg
http://i.imgur.com/aJYZG.jpg
http://i.imgur.com/vodWl.jpg

Now closed
http://i.imgur.com/6yRMd.jpg
http://i.imgur.com/R9RvO.jpg
http://i.imgur.com/jdnIt.jpg

This thing is to send power to the 4 servos and the box
http://i.imgur.com/WDQXm.jpg


WORKING:
http://www.youtube.com/watch?v=1afqRXBLZZA