This is C.A.F (Controlador Animatronico de Fursuit, Yeah i dont have another name D=), this is what control my fursuit, check the video:

http://www.youtube.com/watch?v=qAXr34ht0Bs


Well i have to explain something about it. I started the first C.A.F. Some images and concepts are on links at the end.

In oct 2011, and finished the first on Dec 2011 but at same started the new one. This is the new.

This system is composed by 3 parts
1º The C.A.F, the box, this box contains an Atmega328 (its an chip with 2kb of ram and 16mhz of clock), inside it i programmed 4 Servos that work to move the eras and tail. In my suit i am using only 3. This box select an random sequence of movement and run it every random moment. I dont control.

2º The wires, they send power to servos and C.A.F and send the command from C.A.F to Servos

3º Regulator, this part send only the necessary power supply to the system, i can use an 9v NihMh baterry to an 12v 5500mah LiPo battery.

Using the suit, completely discret using the suit :P


Whole system its Arduino based



Atmega http://en.wikipedia.org/wiki/ATmega#Basic_families
Servo http://en.wikipedia.org/wiki/Servo_.....dio_control%29
Arduino http://en.wikipedia.org/wiki/Arduino