FA+
Shop
Pre-Made Chain
14 years ago
General
Hey there, all. I've decided that I'm going to have a stock of some of my more 'generic' weaves. The Half-Persian 4-1 in a couple sizes, Jens Pind Linkage in the enameled copper, and a couple other things. I've also added jewelry-grade copper to my list. It's beautifully colored - a soft pink - and of course, there is always a healing effect when copper is introduced. It's great for joint pain. I have one weave in the pure copper already set up for order, just give me a length. I can have more made quickly, and I can take commissions, of course. My mate and I are going to be getting an actual commissions page up soon, with /GOOD/ pictures and price estimates for different weaves and materials. Here's what I have made for immediate sale.
Pure (Healing) Copper Bracelet - Vipera Berus Weave - 20ga 3.0mm with a hand made (same material) hook-in-loop clasp.
Argentium Sterling-clad Copper (non-healing) Bracelet - Half-Persian 4-1 Weave - 20ga 5/32" with a dark grey lobsterclaw clasp.
Galvanized Steel Bracelet - Jens Pind Linkage 3 (JPL3) - 16ga - No clasp yet due to large wire size. Just let me know what kind of clasp you like, and I'll throw it in for free. (Within reason, please.) Remember: This one is /Galvanized Steel/. It will /not/ rust, but don't get it wet. Damp air won't hurt it, but soaking it will. It will get a very hard white coating on the outside - called scaling - that is quite unsightly and uncomfortable. However. Unless someone has an allergy to Zinc, it's very unlikely that they will have an allergic reaction to Galvanized Steel, and it's good for normal wear. It's not easily damaged by anything, and is very strong.
Jewelry-metal clad Copper (non-healing) Bracelet - Jens Pind Linkage 3 (JPL3) - 20ga 2.5mm - I have quite the stock of this chain; enough to make a couple of bracelets or even a necklace (possibly two.) If you're interested in anything made with it, let me know. It's quite pretty, but know that the jewelry-metal coating used on it /will/ eventually wear off. With care, it can take quite a while, but it will eventually start. The worn product is also quite cool looking, and has a very old-style feel to it when tarnished. I can put gunmetal grey lobster claw clasps, or hand-make a matching hook-and-loop for it. Your choice.
More general stuff:
Bright Aluminum Keychains - Jens Pind Linkage 5 (JPL5) - 16ga - These are really cool. About 2.5" long or so, made from a really neat weave called JPL5. It's an offshoot of the JPL3 weave above, and is quite beefy, even though made from aluminum. I'll ship these with a steel keyring included, but it's easy to remove and put on your own if you like. These I have a set price for. They're $5 each.
Stainless Steel Keychains - Various Weaves - 16ga 1/4" - I can make multiple of these VERY quickly, so if you're interested in any of the following weaves for keychains, just let me know. These run about 2.5 - 3", and are between $5 and $8 depending on the ring-intensiveness.
Pictures of the above will be going online slowly in the next couple of days, so check back!
-Malachai
Pure (Healing) Copper Bracelet - Vipera Berus Weave - 20ga 3.0mm with a hand made (same material) hook-in-loop clasp.
Argentium Sterling-clad Copper (non-healing) Bracelet - Half-Persian 4-1 Weave - 20ga 5/32" with a dark grey lobsterclaw clasp.
Galvanized Steel Bracelet - Jens Pind Linkage 3 (JPL3) - 16ga - No clasp yet due to large wire size. Just let me know what kind of clasp you like, and I'll throw it in for free. (Within reason, please.) Remember: This one is /Galvanized Steel/. It will /not/ rust, but don't get it wet. Damp air won't hurt it, but soaking it will. It will get a very hard white coating on the outside - called scaling - that is quite unsightly and uncomfortable. However. Unless someone has an allergy to Zinc, it's very unlikely that they will have an allergic reaction to Galvanized Steel, and it's good for normal wear. It's not easily damaged by anything, and is very strong.
Jewelry-metal clad Copper (non-healing) Bracelet - Jens Pind Linkage 3 (JPL3) - 20ga 2.5mm - I have quite the stock of this chain; enough to make a couple of bracelets or even a necklace (possibly two.) If you're interested in anything made with it, let me know. It's quite pretty, but know that the jewelry-metal coating used on it /will/ eventually wear off. With care, it can take quite a while, but it will eventually start. The worn product is also quite cool looking, and has a very old-style feel to it when tarnished. I can put gunmetal grey lobster claw clasps, or hand-make a matching hook-and-loop for it. Your choice.
More general stuff:
Bright Aluminum Keychains - Jens Pind Linkage 5 (JPL5) - 16ga - These are really cool. About 2.5" long or so, made from a really neat weave called JPL5. It's an offshoot of the JPL3 weave above, and is quite beefy, even though made from aluminum. I'll ship these with a steel keyring included, but it's easy to remove and put on your own if you like. These I have a set price for. They're $5 each.
Stainless Steel Keychains - Various Weaves - 16ga 1/4" - I can make multiple of these VERY quickly, so if you're interested in any of the following weaves for keychains, just let me know. These run about 2.5 - 3", and are between $5 and $8 depending on the ring-intensiveness.
Pictures of the above will be going online slowly in the next couple of days, so check back!
-Malachai
