I recall somewhere there was a site that was a backup of old VCL works. I had it but think I accidently deleted it. I was not done getting my work off it.... does anyone know the site

I have another question... My pig character in Blender.... He has a nice belly, and I want to make it bounce. I have Wiggle Bones for the moobs and the ears... but I tried the soft body trick I saw on youtube but it kinda turned into a spikey ball and gave me a Convex Faces error at the point of binding it to the mesh.

Does anyone have any other ideas outside of doing Blend faces for the whole belly and animating it manually I would rather have an organic look when I have a walk cycle.

I am trying to rig my pig, but I keep running into issues with weight painting. I will have the bones all set up, and whether I do automatic or try to do it manually, I will get the left side painting okay, but the right side will seem to effect the same parts.

For example, I set up for automatic weights, and on the left foot, things looked fine. When I switched over to the right, half the right foot was painted, but the other half on the left foot was painted. If I fix it on the right foot, then the left foot is messed up that same way.

Can someone please help me out with this?

Since the things I have been doing are not gaining many if any faves, I have to ask.... What would you like to see?

I was told that basically if it does not have a dick, no one cares. Is this true? And if I do just join the crowd and draw boner smut, then what?

Some folks say I am doing a good job, that they like my art and appreciate it. But the number of faves or even comments does not indicate that.

So I am asking, What would it take?

I am making stickers for myself.... since no one seems interested, I have not been posting them.

HOWEVER, I would like to learn how to do the animated stickers. I was wondering if ANYONE would be able to point me in the right direction? do I have to make an animation first? Do I make them and upload the frames separate?

Any help would be much appreciated!

Thank you in advance

Well I'm old enough to order off the Senior menu.

I have a story theme in mind, but I don't want to ruin it by trying to write it myself. I was wondering if there were any recommendations for writers taking commissions dealing with cu kolds and hypnosis.

When you are doing the line art do you use the same line width for the entire line art?

I am toying with trying to make some for myself and would like any tips you would be willing to give.

I am pondering what to name my Porcine alt. I am giving him life, so to speak, and he needs a name.... so I ask:

Is Rut a good name for him or too on the snout?

Hello. I just wanted to say that I am open to chats. I try to be friendly and fun. If I am not online, I will respond when I get on next.

I think I am learning that I can't learn if I keep to myself. I'm trying to put myself out there but as an introvert, Its an uphill battle

For the animators out there who do penis erections, I was wondering how you do it? to go from limp to hard, are you using a blend slider?

I don't want to copy anyone's style, but I am not sure how to make this happen, and it's not like I can just search youtube....

I have been working slowly on the pig alt. I finished the outer retopo and just need to work on the inner mouth, tongue and teeth.

I still need to do the texturing ( basically painting the skin tones and nails, etc), then hair and facial hair, then rigging the character for animation, and adding the body jiggle. After that I will add clothes.

For those who do the more animated naughty bits, is there any chance I can have a chat to ask about a couple things?

I will post updated images soon.

Now I am not saying this because I am against anything. I am a Bi male who has 2 kids of my own with 3 more to a blended family. However...

I feel Pride month, when it is, does a dis-service to men. It is hard enough for men to take certain things seriously, and also to get certain recognitions. But by putting Pride month in June, this overshadows both Father's day and men's health month. Mind you I worked in an warehouse where we heard all about women's health month, women's heart awareness month, Breast cancer awareness month and so on. So in comparison, the one month that can focus on men's health awareness is overshadowed by Pride.

Now again, I am not saying Pride is bad. I am not saying we should not have it. All I am saying is that ALL men, alphabet or not, need to worry about health concerns. And for the gay men with Kids, That's twice the dis-service done to you as well.

So after 3 years and various ups and downs, I was fired for not performing up to the expectations of a Keyholder. Funny since my review less than a month before had me at meets or exceeds expectations. In actually I suspect it was my multiple attempts to have something done about attendance. See there was no policy so folks would come in up to an hour late and call out around once a week or so. After writing to HR, my boss and the bosses boss, I was let go a few days after with some B.S. reasoning. so basically retaliation.

That was the 18th of April. Starting the 8th of May, I have a new job making just shy of what I was making. It is most defiantly a physical job, more so than I was expecting. I work as one of the night shift janitors at a local Vancouver Clinic, from 6pm to 2:30 am. And it has been very physical. My calves are burning and my lower back is disgusted with me. I used to do around 20K steps a day at my old job, but I think I am doing much more. Since it's overnight I haven't done an exact count.

Bright side is it's Monday - Friday so I will be back to having Saturdays off to do things again. Down side, while I am adjusting to this new work schedule and the body complaints, I have not done much of anything beyond watching youtube and household chores.

It's that time of the year where I level up. One more year and I can start getting senior citizens. Discounts.....so there is that....

I'm back on telegram and am looking for some stickers. Looking for both pig and panther. May be looking to commission as well.... and yes, SFW and NSFW versions.

I'm a grey muzzle and I feel like, while I do enjoy adult material, that I am just overwhelmed by it all. I enjoy art, but I have been enjoying some of the comic series that can have a story, not just the sexualized pinup.

I'm not bad mouthing anyone and I'm not condoning anyone's likes. I have just found myself enjoying more general and mature art without the sexual adultness if that makes any sense.

So if I'm not faving as much as I was, that is why. I'll still be here but may be un following a few folks as well.


Thanks.

Thank you to the one fur who was nice enough to help. And thank you to the 2 that said they would help if they knew.

I don't know if I just have a bad rep or if the next gen of furs are just absorbed in the Yiff that they forget about the people who are the furs at the keyboards.

Either way, My respect and appreciation to the 3 of you who remembered and replied.

Thank you!

Evidently if you can't find an answer on you tube and you go asking for help from someone who knows.... they are going to tell you to find it on YouTube and go pay to learn because it's so simple.

I've been nice. I've asked for help and given help when asked. Why is it so hard, if you know, to even point someone in the right direction and not just say "go look it up on you tube, I don't have time to give you a tutorial"? That's close to the actual answer I got. I even thanked the person for answering me because NO ONE ELSE WOULD and got a stating remark back like I was saying they where an ass or something.

Nice guys finish last afterall.

I am working on trying to rig my G1 Transformer. I am still needing some help with trying to rig sliding pieces and the like. I know there are plenty of blender artists out there and I am asking for a bit of help. I'm willing to share the file and do some art in payment for the help.

I still have not been able to animate my 3D g1 Huffer, and have been trying to rig him. However, 1) I never have been good at rigging, even in Maya, and 2) This is not a normal rotation sort of rigging. Parts will be sliding in and out of one another. I am having a hard time trying to create a rig that does not blow everything up or rescale things. I am more than willing to share my file so I can get help, and learn from this what I have been doing wrong.

Can anyone help, or more to the problem, is anyone willing to help please?

I have been absent from arting, but would be willing to trade some art in trade for help.

Thank you.

I hated Rigging in Maya, but in Blender I am lost. I am trying to rig my G1 Huffer with bones to help the Transformation process, but even after watching videos, I am still lost. I have the basic bones laid out like I would want (I have them set for the wheels to spin, the cab to move, arms to slide out and around and legs to extend) but when I go to move them, they still rotate on the curser? How can I get them to rotate on their individual centers?

Please help.

I am still trying to get a handle on some things. One thing that seems to keep happening is the highlight object selected seems to keep turning off. I don't know how, and I don't know how to turn it back on. When this happens I can't see the wire frame either, thus killing my ability to model and I am too far in to try restarting.

Can anyone help me please?

Thank you.

So it seems I got my positive test back today... Happy New Year.

That, my Boss was let go, and I don't have enough PTO saved up because I believed somone who said we got a bank of PTO Hrs at the first of the year.... nope, just the 1.8 Hrs per 400 Hrs worked.

I know I am not active as much as I used to be.

For those who walked the parades and used my parents house for a changing room (fursuits), I have some bad news

Monday, 10/26, at 11:34, my family said goodnight to my mother for the last time. She passed quickly in retrospect, having been hospitalized for a pain in her guts. She had surgery for a flesh eating bacteria some time ago and the arteries where deteriating, and bleeding into her stomach. From there things went down hill. She was under a hundred pounds, she hardly ate and had no bodily reserves. So the surgery that could have saved her life a while longer, would have killed her because her heart and kidneys where too weak.

My dad, my youngest daughter and I decided it would be best to make her comfortable and let her go on her terms. She was on a ventalator and at least 7 medications. We talked to her, and told the chaplin stories about her. We knew it would be best but we did not think it would be quick as it was. Her breathes came farther apart and reading her lips, I saw her last words that haunt me: "I can't. I can't"

She was the backbone of our family. I'm scared for what will happen with my dad. I never saw him so vulnerable and loving as I did at her final moments. They where married for 52 years on the 10th of this month. She passed at 69.

Some might say this is too much personal information I'm sharing, but this is more for me and expressing the pain. out of the thousands of furs, I don't even know if the 10 or so furs that met her are even here or would remember.