More pc troubles
a year ago
Yea got some more unfortunately and am looking for help/solutions but am finding all sorts of diff answers.
Problem:
Screen goes black and get a msg from my screen i don't have feed of the gc anymore and the x3 fans go (i think) full blast. This doesn't stop it seems until i force stop it and reboot with no blue screens or windows recovery thing popping up so all is normal.
I first had this with a blender render a long while ago, since then it's also starting with games. Even the not so intensive ones. As well as with the recent camilla ones. I render it at the same values and it happened with one as well.
I believe i updated all drivers to it's latest. It's a 3080 A54 Asus TUF gaming geforce rtx from arround 05-2021 so +- 3y old.
Using gforce experiances am looking at the temps and it's around 65 ish
So far am not certain what the issue may be but a colleague at work also said it might be the card that's getting bad/kaput.
Checked the power supply to the card but it's not like i move my rig every 2 days it could get loose.
Might be dusty so have to test if that needs some cleaning.
Problem:
Screen goes black and get a msg from my screen i don't have feed of the gc anymore and the x3 fans go (i think) full blast. This doesn't stop it seems until i force stop it and reboot with no blue screens or windows recovery thing popping up so all is normal.
I first had this with a blender render a long while ago, since then it's also starting with games. Even the not so intensive ones. As well as with the recent camilla ones. I render it at the same values and it happened with one as well.
I believe i updated all drivers to it's latest. It's a 3080 A54 Asus TUF gaming geforce rtx from arround 05-2021 so +- 3y old.
Using gforce experiances am looking at the temps and it's around 65 ish
So far am not certain what the issue may be but a colleague at work also said it might be the card that's getting bad/kaput.
Checked the power supply to the card but it's not like i move my rig every 2 days it could get loose.
Might be dusty so have to test if that needs some cleaning.
FA+

But beware of the compatibility with the other components!
Is the monitor old? Is the cable of the monitor old?
Does the issue occur only when gaming/rendering?
These are questions that should be answered before the internet can really help actually solve the issue, there's never too much information.
It worked fine for like +-3y now and i only recently started getting it badly so am leaning on it's either wearing out or i did something that i can't remember that might be the issue. Like i remember now with posting here i bought enshrouded recently and it said my drivers of the gpu was outdated and finally used nvidea gforce experience to update em. So not a clean install i guess but i also remember with fiddeling in it that i had performance on automated so maaaaabbyyyy the thing is auto over performing and making it crash ?? Gonna switch back and see if that was is.
Monitor is a few months older so not that old and cable is also the same. Don't think the monitor would make the fans go full blast if it wouldn't work.
So far ,yes.
Oh so true, just sucky it's not that old and already geting issues like a few months back an ssd died and now this. Plus at the beginning one of the cpu cooler fans got a whine and diden't work propperly.
Though based on what I read from Kibaura the heck you running 8gb of ram only?!?! Wouldn't be surprised if that's hella taxing your system too cause like, 16 is bare minimum these days with 32 being 'a good safety net'. I don't know if that has something to do with rendering but I know sure as heck it isn't helping having such a low amount of RAM.
Hella no, i got ultra safe and went for 64gb of ram. Only issue now is that 10vram of the card is on the edge i think as now it's common 12 to 16.
Is that 65 degrees Idling or under load? Under load that good.. Idling thats bad and needs cleaning and possible re-paste and pads..
Are you running under 16gigs ram? if so ya going to have a file swap issue..
Updated drivers CLEAN install. Over clocked ? reset factory default etc...
Carefully pull the board clean it and reseat card and power cables and find a way to support the card on the unsupported side. it might be twisting in the slot.
Looking at Youtube this was a problem many others have had..
"3080 black screen fan full speed no signal"
I switched a bad ssd drive a few months ago but that's on the other side of the case. Other then that i don't recon anything else.
Load, i sorta noted it with games, enshrouded 65 ish, hearthstone 47, forever skies 68. Gonna see with more games and come to think of it gotta test that out with a render.
Way above in fact ,64.
No idea, with enshrouded it gave a warning that they where outdated and i always ignored the pop up from nvida as well as avg saying it was outdated. Then i signed into the geforce experiance app that i had and let it do it's thing. Then the warning was gone on enshrouded so no idea if this would have wiped it and went all new or just patched it.
I don't think i overclocked my rig. Watched a lot of vids about it but never dared to fiddle with the options and change things.
Yea might have to do a deep clean, also just watched a recent jay2cent vid about the pads going bad over time from load and stuff so might be that.
Oh i have had a support on it from the start knowing it would sag. Just a piece of plastic that stand at the end of it to keep it straight.
I just hoper i can acced that clip on the board that holds the gpu as it's so beefy.
Damn, i've been looking for weeks with nothing near that result, it's exactly what am having. But more longer into the games, not right from the start.